HIRSCHMANN-Magnum FT14 and FT14H

BELDEN, HIRSCHMANN-Magnum FT14 and FT14H Converter Switches with 10 Mb Fiber to Copper 赫斯曼Magnum FT14和FT14H轉換器，10 Mb光纖轉銅線

Magnum FT14 and FT14H Converter Switches with 10 Mb Fiber to Copper

For any user who needs a 10 Mb fiber link connected to one or two 10/100 copper devices, the "go anywhere" Magnum CSN14 Converter Switch is a versatile and handy solution.

The Magnum CSN14 family of Converter Switches, with a 10 Mb Fiber port built in covers the full range of application environments with regular (office), Hardened (factory floor), and Premium-rated (outdoor) versions. Extra features for heavy-duty and extended temperature operation ranges are included selectively in the Hardened factory-floor and Premium-rated outdoor models. This selection of models offers the best price-to-value ratio for each user and installation.The compact package is ideal for "edge of the network" installation, and can be conveniently mounted to suit any application.

• RJ-45 Port - All models provide an uplink switch on the RJ-45 port, Link Pass-Through
• Power flexibility - Family of temperature ratings and power supply types, external AC and internal DC
• Either DIN-Rail or Tray-Mountable - Metal enclosure. Panel mounting, DIN-Rail or, Rack-mount tray option

• RJ-45 Port - All models provide an uplink switch on the RJ-45 port, Link Pass-Through
• Power flexibility - Family of temperature ratings and power supply types, external AC and internal DC
• Either DIN-Rail or Tray-Mountable - Metal enclosure. Panel mounting, DIN-Rail or, Rack-mount tray option

Performance -

- Fiber port:100 Mb HDX / FDX, all types of connectors for multi-mode or single-mode
- RJ-45 Ports Data Rate: 10/100Mbps, FDX and HDX modes.
- Auto-negotiation and auto-cross MDI-MDIX on both RJ-45 ports occurs at
- LINK-enable.No cross-over cables required.
- Non-blocking switching, 128KB packet buffer memory
- Address buffer storage = 2K addresses
- Address buffer age-out time =300 seconds

Network Standards - Ethernet IEEE 802.3, IEEE 802.3u; IEEE 802.1p, 100BASE-TX, 10BASE-T, 100BASE-FX

VLANs Support - Data packets that have the 4 bytes tagged VLAN field (IEEE 802.1q) inserted in them are received and transmitted unchanged by all CS14 Converter Switches.

Operating Environment -

- Ambient Temperature ratings:
- CS14: the ambient temperature rating is 0°C to 40°C.
- CS14H: the ambient temperature rating is -25°C to 60°C long term per independent agency tests (UL), or -40°C to - 85°C short term per IEC Type Tests
- CS14P: the ambient temperature ratings of -40°C to 75°C long term per independent agency tests (UL), or -50°C to 100°C short term per IEC Type Tests.
- Storage temperature, all models: -40°F to 185°C (-40°C to 85°C)
- Cold start: CS14H model to -20°C, CS14P model to -40°C
- Ambient Relative Humidity, all models: 5% - 95%(non-condensing)
- Altitude, all models: -200 to 50,000 ft. (-60 to 15,000m)
- Conformal coating (humidity protection) option, request quote.
- H and P models are designed for NEBS compliance, including vibration, shock, and altitude.

Packaging -

- Enclosure:Robust sheet metal (steel)
- Dimensions of units: 3.5 in H x 3.0 in W x 1.0 in D(8.9 cm x 7.6 cm x 2.5 cm)
- Weight: CS14 Switch Units: 4.6 oz (130g)
- Power Supply - d, i: 5.8 oz (165g)
- Power Supply - Hd, Hi: 5.8 oz (165g)
- Power Supply - Pd, Pi: 7.9 oz (225g)
- Cooling Method: Convection on regular model, case used as a heat sink on H and P models.
- H&P models: IEC 529 rated IP40

Mounting for CS14 Family of Switch Units -

- Metal panel mounting clips: included
- DIN-Rail mounting option: Model # DIN-RAIL MC2
- Rack-mount option: Model MC14-TRAY.
- Depth: 6.0", Width 17"
- Height 2.25"(15 cm D x 43cm W x 5.7cm H)

Switches - Fiber port has manual selection of HDX or FDX, default is FDX

Fiber Port Connectors -

- "ff" selections of the "fiber flavor" (see table below):
- "SC"= 100BASE-FX-SC: fiber optic multi-mode with SC type, 2 km
- "ST"= 100BASE-FX-ST: fiber optic multi-mode with ST type, 2 km
- "MTRJ"= 100BASE-FX-MTRJ: fiber optic multi-mode w/ MTRJ, 2 km
- "MLC"= 100BASE-FX-MLC: fiber optic multi-mode with LC, 2Km
- "SSC"= 100BASE-FX-SSC: fiber optic single-mode with SC, 20 km
- "SSCL"= 100BASE-FX-SSCL: fiber optic single-mode SC, "Long Reach" 40 km
- "SST"= 100BASE-FX-SST: fiber optic single-mode with ST type, 20 km
- "SLC"- 100BASE-FX-SLC: fiber optic single-mode with LC-type, 20 km
- For other fiber connectors, request quote.

RJ-45 Port Connectors -

- RJ-45 with auto-cross, 100BASE-TX and 10BASE-T: shielded 8-Pin female.Supports shielded (STP) and unshielded (UTP)
- For PoE Pass-through option on H and P models, request quote.

LED Indicators, Dual, Top Front and In-End -

- POWER: ON for power applied
- 10/100 per RJ-45 port: Steady ON for 100 Mb, OFF for 10 Mb speed
- LK/ACT per port:Steady ON for LINK with no traffic, blinking for Activity.
- F/H per port in end: Steady ON for F/D mode, OFF for H/D mode.

Power: On for Power Applied -

- 10/100 per RJ-45 port: Steady ON for 100 Mb, OFF for 10 Mb speed
- LK/ACT per port:Steady ON for LINK with no traffic, blinking for Activity.
- F/H per port in end: Steady ON for F/D mode, OFF for H/D mode.

Power Supplies for AC (External) -

- Power input DC jack (8 to 15V) is 2.5mm, center +ve, with 6ft. DC cord
- Input: 95-125vac at 60 Hz for "-d" models,
- Input: 215-240vac at 50 Hz for "-i" models that have IEC power connector in the external power unit.
- Input: 100-240vac at 47-63 Hz for "-Hd", "Hi" models, see footnote 1
- Input:95-260vac at 47-63 Hz for "-Pd", "Pi" models, see footnote 2

Power Input Options for DC -

- 12V DC, internal (range of 8.0 to 15V DC), built-in screw terminal block for +, -, ground. The 12V DC jack is also present.
- 24V DC internal (range of 18 to 36V DC) built-in screw terminal for +, -, ground. The 12V DC jack is also present.
- -48V DC internal (range of 30 to 60V DC), built-in screw terminal block for +, -, ground. The 12V DC jack is also present.
- Note1:the 12V DC jack can be used for dual source DC power input
- Note2:internal DC power floats, user may ground + or â€, if desired.
- Power Consumption, all models: 4.8 Watts typical and 6 Watts max.

Agency Approvals and Standards Compliance -

- UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A.
- NEBS L3 and ETSI compliant
- H and P models: IEEE P1613 Environmental Std for Electric Power Substations
- IEC61850 EMC and Operating Conditions Class C for Power Substations
- P model: NEMA TS-2 and TEES for traffic control equipment
- P model: designed for UL 2043 above-the-ceiling installation
- All models: compliant with EN50155 Railway Applications Standard

Warranty -

Three years
Made in USA

1: External 12V1A power supply, wall plug or power cord for North America AC receptacles. Temperature rating same as CS14, see above. (North America: for spare, order Model PSH-12V1A-Hd. International: order Model PSH-12V1A-Hi with IEC plug).

2: External 12V1A power supply, rated for outdoor temperatures same as CS14, see above. Universal AC input with recessed IEC plug. (North America: for spare, order Model PSP-12V1A-Pd, International: order Model PSP-12V1A-Pi with IEC plug).

Product Selection Guides

Magnum FT14 FT14H Media Converters

keyword: google, gmail, wikipedia, 維基百科, YEIDA, 宜大電線, 工業電腦, 工業4.0, 工業自動化, Facebook, 亞馬遜, 微軟, 機器人, AI人工智慧, TESLA, APPLE, 工業乙太網路, BELDEN, Hirschmann,  Magnum FT14 and FT14H Converter Switches with 10 Mb Fiber to Copper 赫斯曼 Magnum FT14和FT14H轉換器，10 Mb光纖轉銅線