1. Lumberg- Cordsets double-ended and Data Cables 線組，雙端電纜和數據電纜
    Lumberg- I/O Systems Active - Modular
    Lumberg- T-Connectors and Adaptors 接頭轉換器
    Lumberg-Circular 7/8 Connectors接頭插座
    Lumberg-Circular M23 Connectors 接頭插座
    Lumberg-I/O Modules Activ - Stand Alone-AS-Interface
    Lumberg-I/O Modules Activ - Stand Alone-CANopen
    Lumberg-I/O Modules Activ - Stand Alone-DeviceNet
    Lumberg-I/O Modules Activ - Stand Alone-Industrial Ethernet
    Lumberg-I/O Modules Activ - Stand Alone-Interbus
    Lumberg-I/O Modules Activ - Stand Alone-Profibus
    Lumberg-M12 Circular Connectors M12連接器
    Lumberg-M8 Circular Connectors (for Actuators Sensors and Data)
    Lumberg-Passive Distributors (ASB Series)
    Lumberg-Fieldbus I/O Solutions 現場總線I / O解決方案
    Lumberg-Industrial Connectors 工業連接器
    Lumberg-Industrial Ethernet 工業以太網
    Lumberg-Power Connectors 電源連接器
    Lumberg-Stainless Steel Connectors 不銹鋼連接器
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > Lumberg-I/O Modules Activ - Stand Alone-DeviceNet

    Lumberg-0930 DSL 107 I/O Modules with Digital Outputs (DO) DeviceNet™ device 數位資料輸出端接頭插座
    看原圖
    		30058568




    商品編號: Lumberg-0930-DSL-107

    Lumberg-0930 DSL 107 I/O Modules with Digital Outputs (DO) DeviceNet™ device 數位資料輸出端接頭插座



    ★★★★商品說明★★★★

    Product description

    Type0930 DSL 107
    Order No.29950
    DescriptionDeviceNet™ device with 8 digital outputs (2 A) to connect standard actuators, combined FIXCON/M12 socket, rotary switches for addressing, M12 bus connection, 7/8“ actuator supply
    DiagnosticsThe diagnostic message via the fieldbus provided by the DeviceNet™ modules of the brand Lumberg Automation™, consists of an additional input byte, which is appended to the standard input process data. Depending on the particular module, the diagnostics is sent module- or slot-based. It is generated when an overload, actuator low voltage or actuator short circuit is detected. In addition, the corresponding LEDs simplify the troubleshooting.
    NoteThe application of these products in harsh environments should always be checked before use. Specifications subject to alteration.
    Color of housing orange
    Product characteristicsOil resistance, EMC resistance, Vibration resistance
    　

    Classification

    Belden classI/O Modules with Digital Outputs (DO)
    Belden brandLumberg-Automation
    　

    Mechanical data

    Weight570 g
    Dimensions (W x H x D)60 mm x 199 mm x 51.3 mm
    　

    Environmental conditions

    Environmental temperature0 ºC ... 60 ºC
    Degree of protection (IP), mountedIP67
    　

    Materials

    Housing material / Molded bodyPUR
    　

    Approvals

    ApprovalsUL
    　

    Bus system

    Fieldbus systemDeviceNet
    Bus ConnectionM12
    AutobaudYes
    Transmission ratemax. 500 kbit/s
    Address range0 dec. ... 63 dec.
    Rotary address switches0 dec. ... 63 dec.
    Default address63 dec.
    Communication modesPolled I/O message connection, Change of state/ cyclic message connection, Explicit message connection
    　

    Supply Fieldbus Interface

    Supply Fieldbus InterfaceUL
    Nominal voltage (Supply Fieldbus Interface)24 V DC
    Voltage range (Supply Fieldbus Interface)11 - 30 V DC
    Current consumption (Supply Fieldbus Interface)max. 80 mA
    Reverse polarity protection (Supply Fieldbus Interface)Yes
    Function Indicator (Supply Fieldbus Interface)LED green
    　

    Actuator power supply

    Actuator power supplyUS with potential separation
    Nominal voltage (Actuator power supply)24 V DC
    Voltage range (Output power supply)19 V ... 30 V
    Reverse polarity protection (Output power supply)Yes
    Indication (Output power supply)LED green
    　

    Outputs

    Output wiringType 2 A acc. to IEC 61131-2
    Signal type (Outputs)Digital Outputs
    Number of channels (Outputs)8
    Channel type (Outputs)N.O., p-switching
    Nominal output current per channel2 A
    Short-circuit proof (Outputs)Yes
    Max. output current per module (Outputs)12 A
    Overload-proof (Outputs)Yes
    Channel status indicator (Outputs)LED yellow per channel
    Diagnostic indication (outputs)LED red per channel
    　

    Scope of delivery and accessories

    Scope of deliveryDust covers M12 - 2 pieces, Attachable labels - 10 pieces
    　

    Pictures

    Image
    　

    Drawings

    Drawing
    　

    Downloads

    Pin assignment


    ★★★★商品規格描述★★★★

    Product description

    Type0930 DSL 311
    Order No.45133
    DescriptionDeviceNet™ device with 8 digital outputs (2 A) to connect standard actuators, combined FIXCON/M12 socket, rotary switches for addressing, 7/8" bus connection, 7/8“ actuator supply
    DiagnosticsThe diagnostic message via the fieldbus provided by the DeviceNet™ modules of the brand Lumberg Automation™, consists of an additional input byte, which is appended to the standard input process data. Depending on the particular module, the diagnostics is sent module- or slot-based. It is generated when an overload, actuator low voltage or actuator short circuit is detected. In addition, the corresponding LEDs simplify the troubleshooting.
    NoteThe application of these products in harsh environments should always be checked before use. Specifications subject to alteration.
    Color of housing orange
    Product characteristicsOil resistance, EMC resistance, Vibration resistance
    　

    Classification

    Belden classI/O Modules with Digital Outputs (DO)
    Belden brandLumberg-Automation
    　

    Mechanical data

    Weight570 g
    Dimensions (W x H x D)60 mm x 199 mm x 51.3 mm
    　

    Environmental conditions

    Environmental temperature0 ºC ... 60 ºC
    Degree of protection (IP), mountedIP67
    　

    Materials

    Housing material / Molded bodyPUR
    　

    Approvals

    ApprovalsUL
    　

    Bus system

    Fieldbus systemDeviceNet
    Bus Connection7/8"
    AutobaudYes
    Transmission ratemax. 500 kbit/s
    Address range0 dec. ... 63 dec.
    Rotary address switches0 dec. ... 63 dec.
    Default address63 dec.
    Communication modesPolled I/O message connection, Change of state/ cyclic message connection, Explicit message connection
    　

    Supply Fieldbus Interface

    Supply Fieldbus InterfaceUL
    Nominal voltage (Supply Fieldbus Interface)24 V DC
    Voltage range (Supply Fieldbus Interface)11 - 30 V DC
    Current consumption (Supply Fieldbus Interface)max. 80 mA
    Reverse polarity protection (Supply Fieldbus Interface)Yes
    Function Indicator (Supply Fieldbus Interface)LED green
    　

    Actuator power supply

    Actuator power supplyUS with potential separation
    Nominal voltage (Actuator power supply)24 V DC
    Voltage range (Output power supply)19 V ... 30 V
    Reverse polarity protection (Output power supply)Yes
    Indication (Output power supply)LED green
    　

    Outputs

    Output wiringType 2 A acc. to IEC 61131-2
    Signal type (Outputs)Digital Outputs
    Number of channels (Outputs)8
    Channel type (Outputs)N.O., p-switching
    Nominal output current per channel2 A
    Short-circuit proof (Outputs)Yes
    Max. output current per module (Outputs)12 A
    Overload-proof (Outputs)Yes
    Channel status indicator (Outputs)LED yellow per channel
    Diagnostic indication (outputs)LED red per channel
    　

    Scope of delivery and accessories

    Scope of deliveryDust covers M12 - 2 pieces, Attachable labels - 10 pieces
    　

    Pictures

    Image
    　

    Drawings

    Drawing
    　

    Downloads

    Pin assignment