1. Lumberg- Cordsets double-ended and Data Cables 線組，雙端電纜和數據電纜
    Lumberg- I/O Systems Active - Modular
    Lumberg- T-Connectors and Adaptors 接頭轉換器
    Lumberg-Circular 7/8 Connectors接頭插座
    Lumberg-Circular M23 Connectors 接頭插座
    Lumberg-I/O Modules Activ - Stand Alone-AS-Interface
    Lumberg-I/O Modules Activ - Stand Alone-CANopen
    Lumberg-I/O Modules Activ - Stand Alone-DeviceNet
    Lumberg-I/O Modules Activ - Stand Alone-Industrial Ethernet
    Lumberg-I/O Modules Activ - Stand Alone-Interbus
    Lumberg-I/O Modules Activ - Stand Alone-Profibus
    Lumberg-M12 Circular Connectors M12連接器
    Lumberg-M8 Circular Connectors (for Actuators Sensors and Data)
    Lumberg-Passive Distributors (ASB Series)
    Lumberg-Fieldbus I/O Solutions 現場總線I / O解決方案
    Lumberg-Industrial Connectors 工業連接器
    Lumberg-Industrial Ethernet 工業以太網
    Lumberg-Power Connectors 電源連接器
    Lumberg-Stainless Steel Connectors 不銹鋼連接器
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > Lumberg-I/O Modules Activ - Stand Alone-AS-Interface

    Lumberg-0910 ASL 438 I/O Modules with Digital Inputs and Outputs (DI/DO) 接頭插座
    看原圖
    		30056186




    商品編號: Lumberg-0910-ASL-438

    Lumberg-0910 ASL 438 I/O Modules with Digital Inputs and Outputs (DI/DO) 接頭插座



    ★★★★商品說明★★★★

    Product description

    Type0910 ASL 438
    Order No.107971
    DescriptionAS-Interface flat cable module with 4 digital inputs for 2-wire or 3-wire sensors and 4 digital outputs to connect standard actuators, M12 socket, infrared interface for the addressing
    DiagnosticsPeripheral faults such as short circuit or overload are reported as group diagnostics to the master. In addition, there is a diagnostic LED on each slave.
    NoteThis AS-Interface module conforms to AS-i specification 3.0 and can only be operated with a master, which also supports 3.0. The input and output channels are connected in pairs on the signal side. This allows a bigger variety of connections (see pin assignment). When connecting a dual-channel sensor/actuator to input/output socket 1 or 3, the sockets 2 and 4 may not be connected with another sensor/actuator due to the cross-wiring of the inputs/outputs. The use of these products in aggressive media should be checked in individual cases. Subject to technical changes!
    Color of housing orange
    Product characteristicsOil resistance, EMC resistance, Vibration resistance
    　

    Classification

    Belden classI/O Modules with Digital Inputs and Outputs (DI/DO)
    Belden brandLumberg-Automation
    　

    Mechanical data

    Weight300 g
    Dimensions (W x H x D)60 mm x 152 mm x 35.8 mm
    　

    Environmental conditions

    Environmental temperature-25 ºC ... 80 ºC
    Degree of protection (IP), mountedIP67
    　

    Materials

    Housing material / Molded bodyPUR
    　

    Approvals

    ApprovalsUL pending
    　

    Bus system

    Fieldbus systemAS-Interface Version 3.0
    Bus ConnectionASI flat cable connection
    Device IndentificationAS-Interface profile: S-7.A.7; I/O configuration: 7 hex; ID code: A hex; ID2 code: 7 hex
    Support A/B addressingYes
    　

    Supply Fieldbus Interface

    Supply Fieldbus InterfaceAS-Interface net
    Voltage range (Supply Fieldbus Interface)26.5 - 31.6 V DC
    Current consumption (Supply Fieldbus Interface)max. 250 mA
    Reverse polarity protection (Supply Fieldbus Interface)Yes
    Function Indicator (Supply Fieldbus Interface)LED green
    　

    Sensors power supply

    Voltage range (Sensor power supply)17-30 V
    Sensor current (at TU30°C) (Sensor power supply)max. 200 mA
    Short-circuit proof (Sensor power supply)Yes
    　

    Actuator power supply

    Actuator power supplyAUX with potential separation
    Nominal voltage (Actuator power supply)24 V DC
    Voltage range (Output power supply)10 V ... 30 V
    Reverse polarity protection (Output power supply)Yes
    Indication (Output power supply)LED green
    　

    Inputs

    Input wiringType 2 acc. to IEC 61131-2
    Signal type (Inputs)Digital Inputs
    Number of channels (Inputs)4
    Channel type (Inputs)N.O., p-switching
    Nominal input voltage24 V DC
    Voltage (Signal status "1") - ExplanationUS > 11 V / IS > 6 mA
    Voltage (Signal status "0") - ExplanationIS < 2 mA
    Channel status indicator (Inputs)LED yellow per channel
    Input current at 24 V DC (typ.)15 mA
    　

    Outputs

    Output wiringType 2 A acc. to IEC 61131-2
    Signal type (Outputs)Digital Outputs
    Number of channels (Outputs)4
    Channel type (Outputs)N.O., p-switching
    Nominal output current per channel2 A
    Short-circuit proof (Outputs)Yes
    Max. output current per module (Outputs)4 A per module
    Overload-proof (Outputs)Yes
    Channel status indicator (Outputs)LED yellow per channel
    Diagnostic indication (outputs)LED red
    　

    Scope of delivery and accessories

    Scope of deliveryDust covers M12 - 2 pieces, Attachable label - 10 pieces
    　

    Pictures

    Image
    　

    Drawings

    Drawing
    　

    Downloads

    Pin assignment