1. Carlisle-Connector Backshells 連接器後背殼-接頭
    Carlisle-Data Bus Connectors 數據總線連接器(接頭)
    Carlisle-RF/Microwave Connectors 射頻微波同軸電纜接頭
    Carlisle-Specialty Connectors 特殊設計射頻微波同軸電纜接頭
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > Carlisle-Specialty Connectors 特殊設計射頻微波同軸電纜接頭

    Carlisle-ARINC Filter ARINC 404 & ARINC 600 ARINC過濾器
    看原圖
    		5713559




    商品編號: Carlisle-ARINC-Filter

    Carlisle-ARINC Filter ARINC 404 & ARINC 600 ARINC過濾器



    ★★★★商品說明★★★★

    ARINC Filter

    CarlisleIT manufactures ARINC 404 and 600 filter connectors with QPLd interfaces, front removable, front release size 22 contacts and modular construction. Depending on performance requirements these connectors can be designed using either planar or Chip on Board technologies.

    ARINC過濾器

    CarlisleIT生產ARINC404和600濾波連接器QPLd接口，前置可拆卸，前面放尺寸22觸點和模塊化結構。根據不同的性能要求，這些連接器可以使用平面或板上芯片技術進行設計。

    　
    　
    • An image of a single ARINC 404 TVS connector.

      ARINC 404

      ARINC 404 filter connectors include front release/front removable contacts, high pin counts that can include signal, RF, fiber and filter contacts.

      CarlisleIT ARINC 404 filter connectors feature the complete line of standard ARINC layouts and meet the applicable performance and environmental portions of the ARINC and SAE specifications. These connectors provide the key interface for rack and panel avionics equipment. As with all avionics boxes, signal integrity is paramount and filtering is a must. Due to the rack and panel mating ARINC 404 connectors are used in commercial and military aircraft, including helicopters. They are also found in in-flight instrumentation, flight simulators and radar systems. Combining power and signal contacts are common to this family.

      • Front release/front removable #22 contacts 前面釋放/前可拆卸＃22接觸
        　
      • Planar and/or Chip on Board design平面和/或芯片上的電路板設計
        　
      • Ferrite immobilization鐵素體固定化
        　
      • Modualr filter backpack/standard shell constructionModualr過濾背包/標準shell結構
        　
      • Can incorporate filtering plus Transient Voltage Suppression

        可以將過濾加瞬態電壓抑制

      　

      　

    • An image of a single ARINC 600 Transient voltage suppression filter.

      ARINC 600

      The ARINC 600 family of connectors offer higher contact counts, shell polarization, power and signal contacts and low mating forces. CarlisleIT designs feature a modular approach using standard shells and inserts with a filtered...

      Carlisle Interconnect Technologies ARINC 600 connectors feature the complete line of layouts and meet the applicable performance and environmental portions of the ARINC specifications. Following the ARINC document, CarlisleIT offers receptacle shell sizes 1, 2 and 3. Size 1 shells are a 3 gang style, housing the narrower 11.1mm inserts. Size 2 and size 3 shells use the standard 26.34mm wide inserts with 3 and 6 gangs respectively. CarlisleIT offers a wide variety of insert arrangements that include all standard contact sizes including coax, quadrax and fiber optic. Seventeen contact arrangements offered include a variety of contact sizes. These sizes range from size 22 signal contact down to size 1 coaxial contacts. Sizes 20, 16, and 12 are also available. CarlisleIT also provides size 8 and size 5 coaxial contacts for this family. This rack and panel family was designed for high density with up to 800 contacts potential in one connector mating. Like any box mounted receptacle, these CarlisleIT connectors offer the perfect solution for housing the EMI filter to keep stray noise out.

      • Front release/front removable #22 contacts
      • Planar and/or Chip on Board design
      • Ferrite immobilization
      • Modualr filter backpack/standard shell construction
      • Can incorporate filtering plus Transient Voltage Suppression