| | |
| | SMP
卡萊爾互連技術推出了SMP的“推式”連接器產品線大約二十年前,以射頻/微波系統內促進高密度封裝。 SMP的接口,使設計工程師能夠提高他們的設計的性能和複雜度,並改善其外形。 - Frequency Range: DC - 40 GHz
- 50 Ω Impedance; Blidmateable configuration
- MIL-PRF-39012 compliant
- Ability to withstand Radial/Axial Misalignment
- Board-mount, Field-replaceable, Bullets, Hermetic and
Cable Connector configurations - Custom Connectors Available
»頻率範圍:DC - 40 GHz的 »50Ω阻抗; Blidmateable配置 »MIL-PRF-39012標準 »能夠承受徑向/軸向位移 »板安裝,現場更換,子彈,密封和 電纜連接器的配置 »自定義連接器可用 The SMP interconnect series relies on a floating female-to-female adapter—commonly referred to as a “bullet”—to enable stacking of boards equipped with an SMP male PCB connector. This durable construction and ability to tolerate radial and axial misalignment allows for a blindmate interconnect solution. SMP connectors can also withstand multiple engagement/disengagement cycles without degradation in electrical performance. SMP的互連系列依靠浮動母對母轉接頭,通常被稱為“子彈頭” - 啟用配備一個SMP公PCB連接器板堆疊。這種耐用的結構和容忍的徑向和軸向偏差的能力允許一個盲插互連解決方案。 SMP連接器還可以在電氣性能承受多次接合/分離循環沒有退化。 The success of the SMP product line has spurred the development and commercialization of other blind-mate interconnect systems – namely the SSMP®, TMP® and WMP® to facilitate rapid assembly and testing for the gamut of Military and Commercial RF/Microwave applications. SMP的產品線的成功激勵了其他盲插式互連系統的開發和商業化 - 即SSMP®,TMP®和WMP®便於快速裝配和測試用於軍事和商業射頻/微波應用的色域。 Parameter | Specification |
---|
Impedance | 50 Ω | Frequency range | DC - 40 GHz | VSWR | DC - 26 GHz: 1.15 : 1 (max) 26 - 40 GHz: 1.40:1 (max) | Insertion Loss | 0.1 x √ f(GHz) | DWV @ sea level | 500 Vrms | Insulation Resistance | 5000 megohms (min) | RF High Pot | 325 Vrms @ 5 MHz | Force to Engage | | Full Detent | 15 lbs typical | Limited Detent | 7 lbs typical | Smooth Bore | 2 lbs typical | Force to Disengage | | Full Detent | 5 lbs typical | Limited Detent | 3 lbs typical | Smooth Bore | 0.5 lbs typical | Radial Misalignment | +/- .020 inches | Axial Misalignment | .010 inches | Temperature range | -55 deg C to +165 deg C | Thermal Shock | MIL-STD-202, Method 107, Cond B | Moisture Resistance | MIL-STD-202, Method 106, except step 7b | Corrosion | MIL-STD-202. Method 101, Cond B | Vibration | MIL-STD-202, Method 204, Cond D | Shock | MIL-STD-202, Method 213, Cond I |
Metal | Specification |
---|
BeCu (Beryllium Copper) | ASTM B 196 and/or ASTM B 197 | Brass | ASTM B 36, B121, B16, B16M | Stainless Steel | ASTM A484/ A582 or A555/581 | Iron-Nickel-Cobalt | ASTM F-15 | Dielectric | Specification | Virgin PTFE Fluorocarbon | ASTM D 1710 and ASTM D 1457 | Polyamide-Imide | ASTM D5204 Group 2 Class 1 | Glass | Corning 7070 or Equivalent | Finish | Specification | Gold (75u in. Typ.) | ASTM-B488 Type 1, Class 1.25 | Nickel (100u in. Typ.) | SAE AMS-QQ-N-290 | Pasivation | ASTM A967 | |
| | | |
| |
| |
|
|