Combination Unshielded and Braid Shield
and Overall Braid Shield
Audio, Control and Instrumentation Cables

Combination • 22 AWG Stranded (7x30) TC Conductors • Conductors Cabled • TC Braid Shield Over One Pair (62% Coverage)
Polyethylene Insulation • Chrome PVC Jacket
UL AWM Style 2094 (300V 60°C) CM

Belden-8732  2P (1P Shld + 1P Unshld)

Overall Braid • 22 AWG Solid TC Conductors • Twisted Pair • Polyester Tape + TC Braid Shield (88% Coverage) • 22 AWG Solid TC Drain Wire
PVC Insulation • Black PVC Jacket
UL AWM Style 2095 (300V 80°C) CMG FT4

Belden-8437  1P

Overall Braid • 22 AWG Stranded (7x30) TC Conductors • Twisted Pair • Polyester Tape + TC Braid Shield (86% Coverage) • Stranded TC Drain Wire
PVC Insulation • Black PVC Jacket
UL AWM Style 2095 (300V 80°C) CMG FT4

Belden-8441  1P

Overall Braid • 18 AWG Stranded (16x30) Tinned Copper Conductors • Twisted Pair • Separator + TC Braid Shield (73% Coverage)
Rubber Insulation • Chrome PVC Jacket
300V RMS 80°C

Belden-8208 1P
TC = Tinned Copper
*Capacitance between conductors.
**Capacitance between one conductor and other conductors connected to shield.

Overall Spiral Shield (銅線纏繞隔離)
Audio, Control and Instrumentation Cables

Overall Spiral • 22 AWG Stranded (7x30) Tinned Copper Conductors • Twisted Pair • Tinned Copper Spiral Wrapped Shield (85% Coverage)
PVC Insulation • Chrome PVC Jacket
UL AWM Style 2095  (300V 80°C) CMG FT4

Belden-8737  1P
　

Overall Spiral • 20 AWG Stranded (7x28) Tinned Copper Conductors • Twisted Pair • Tinned Copper Spiral Wrapped Shield (89% Coverage)
PVC Insulation • Chrome PVC Jacket
UL AWM Style 2095  (300V 80°C) CMG FT4

Belden-8759  1P

Overall Spiral • 18 AWG Stranded (7x26) Tinned Copper Conductors • Twisted Pair • Tinned Copper Spiral Wrapped Shield (85% Coverage)
PVC Insulation • Chrome PVC Jacket
300V RMS 60°C  CMG FT4

 Belden-8790  1P

Overall Spiral • 16 AWG Stranded (19x29) Tinned Copper Conductors • Twisted Pair • Tinned Copper Spiral Wrapped Shield (85% Coverage)
PVC Insulation • Chrome PVC Jacket
300V RMS 60°C CMG FT4

Belden-8780  1P

*Capacitance between conductors.
**Capacitance between one conductor and other conductors connected to shield.
　

Introduction

Belden® paired cable products are manufactured in a variety of gage
sizes, dimensions, insulation materials, shielding configurations,
and jacketing materials including Plenum and High-Temperature
versions to meet the technical requirements of many different types
of systems.
　

Paired cables allow balanced signal transmission, which results
in lower crosstalk through common mode rejection. Due to the
improved noise immunity of twisted pairs, they generally permit
higher data speeds than multi-conductor cables.
　

As an aid to proper cable selection, both the suggested working
voltages and the maximum temperature ratings are indicated for
each applicable paired cable selection.
　

Most of our paired cables are available from stock. Many of these
are available off the shelf from distributors. If you have a new or
unusual application or you cannot find a paired cable in this catalog
section that meets your technical requirements, contact Technical
Support at 1-800-BELDEN-1.
　

Paired Cables Packaging
Belden’s unique UnReel® cable dispenser is available for many
of the paired cable products listed in this section. The letter “U”
before the specified put-up length denotes UnReel packaging

keywords: Beden-8737, Audio, 銅網編織, 銅線纏繞隔離, 声音音響, 通訊儀表監控電纜, Beden8737, Beden8759, Beden-8790, Beden-8780, Beden8780, ul2095, Overall Spiral Shield, 銅線纏繞隔離,