商品編號: Belden-83394
Belden-83395, High-Temperature 300V 150°C Overall Beldfoil® Shield Control and Instrumentation Cables. 鋁箔隔離Tefzel®鐵氟龍矽橡膠耐高溫抗輻射化學多芯通訊儀表控制電纜
High-Temperature
Unshielded
Control and Instrumentation Cables
22 AWG Stranded (7x30) TC Conductors • Conductors Cabled • Special Beldfoil Shield (100% Coverage) • 22 AWG (7x30) Stranded TC Drain Wire
FEP Insulation • Red Silicone Rubber Jacket • Noise Reducing Tape
Jacket working voltage 2000V DC, shield to ground VW-1 70°C (min.) to 150°C (max.) operating temperature.
Belden-83394 2C
Belden-83395 3C
Belden-83396 4C
20 AWG Stranded (7x28) TC Conductors • Twisted Pair • Special Beldfoil Shield (100% Coverage) • 20 AWG (7x28) Stranded TC Drain Wire
FEP Insulation • Yellow Silicone Rubber Jacket • Noise Reducing Tape
Jacket working voltage 2000V DC, shield to ground VW-1 70°C (min.) to 150°C (max.) operating temperature.
Belden-83393 2C
20 AWG Stranded (7x28) TC Conductors • Conductors Cabled • Overall Beldfoil Shield (100% Coverage) • Drain Wire
Tefzel® Insulation • Clear Tefzel Jacket
300V RMS 150°C VW-1
Belden-85230 — 2C
Belden- 85240 — 3C
16 AWG Stranded (19x29) TC Conductors • Conductors Cabled • Overall Beldfoil Shield (100% Coverage) • Drain Wire
Tefzel Insulation • Clear Tefzel Jacket
300V RMS 150°C VW-1
Belden-85231 — 2C
Belden-85241 — 3C
TC = Tinned Copper
*Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield.
†Spools and/or UnReel® cartons are one piece, but length may vary ±10% for spools and ±5% for UnReel from length shown.
††100 ft. put-up one piece, exact length.
Tefzel and Kapton are DuPont trademarks.
Introduction
Belden® multi-conductor cables are manufactured in a wide
variety of gage sizes, dimensions, insulation materials, shielding
configurations, and jacketing materials including Plenum and
High-Temperature versions. These cables meet the technical
requirements of many different types of systems. In fact, Belden
offers one of the broadest lines of UL Listed, NEC and CEC
multi-conductor cables available from any single source.
Applications for multi-conductor cables include computers,
communications, instrumentation, sound, control, audio, and
data transmission. Each of these cables is designed to protect
signal integrity under critical conditions by reducing hum, noise,
and crosstalk.
To assist you in selecting the proper cable for your application,
both the suggested working voltages and the maximum temperature
ratings are indicated for each applicable product in this section.
Most of our multi-conductor cables are available from stock. Many
of these are available off the shelf from distributors. If you have a
new or unusual application or you cannot find a multi-conductor
cable in this catalog section that meets your technical requirements,
contact Technical Support at 1-800-BELDEN-1.
Multi-Conductor Cables Packaging
Belden’s unique UnReel® cable dispenser is available for many of
the multi-conductor products listed in this section. The letter “U”
before the specified put-up length denotes UnReel packaging
keywords: Belden-83393, High-Temperature 300V 150°C Overall Beldfoil® Shield Control and Instrumentation Cables. 鋁箔隔離Tefzel®鐵氟龍矽橡膠耐高溫抗輻射化學多芯通訊儀表控制電纜, Belden83394, Belden83395, Belden83396, Belden83393, Belden85230, Belden85240, Belden85231, Belden85241 |