High-Temperature
Overall Braid Shield — Control and Instrumentation Cables
MIL-W-16878/4 (Type E) — Individual Conductors
　

26 AWG Stranded (7x34) Silver-plated Copper Conductors • Cabled and Color-coded • Silver-plated Copper Braid Shield (85% Coverage)
Extruded TFE Teflon® Insulation • White TFE Teflon Tape-wrapped Jacket
600V RMS  -65°C to 200°C VW-1

Belden-83303E — 1C
Belden-83332E — 3C White
Belden-83347E — 4C White
MIL-Spec MIL-W-16878/4 (Type E). Green
　

24 AWG Stranded (19x36) Silver-plated Copper Conductors • Cabled and Color-coded • Silver-plated Copper Braid Shield (85% Coverage)
Extruded TFE Teflon Insulation • White TFE Teflon Tape-wrapped Jacket
600V RMS  -65°C to 200°C  VW-1

Belden-83304E — 1C White
 Belden-83318E — 2C White
Belden-83333E — 3C White
Belden-83348E — 4C White
Complies with MIL-W-16878/4 (Type E) except stranding. Green
　

22 AWG Stranded (19x34) Silver-plated Copper Conductors • Cabled and Color-coded • Silver-plated Copper Braid Shield (85% Coverage)
Extruded TFE Teflon Insulation • White TFE Teflon Tape-wrapped Jacket
600V RMS  -65°C to 200°C  VW-1

Belden-83305E — 1C White
Belden-83319E — 2C White
Belden-83334E — 3C White
Belden-83349E — 4C White
Complies with MIL-W-16878/4 (Type E) except stranding. Green
*Capacitance between conductors.
**Capacitance between one conductor and other conductors connected to shield.
† 100 ft. put-up one piece, exact length.
†† 500 ft. put-up exact, but may contain up to 3 pieces. Minimum length of any one piece is 25 ft.
▲Spools may contain more than one piece. Length may vary ±10% from length shown.

Introduction

Belden® multi-conductor cables are manufactured in a wide
variety of gage sizes, dimensions, insulation materials, shielding
configurations, and jacketing materials including Plenum and
High-Temperature versions. These cables meet the technical
requirements of many different types of systems. In fact, Belden
offers one of the broadest lines of UL Listed, NEC and CEC
multi-conductor cables available from any single source.
　

Applications for multi-conductor cables include computers,
communications, instrumentation, sound, control, audio, and
data transmission. Each of these cables is designed to protect
signal integrity under critical conditions by reducing hum, noise,
and crosstalk.
　

To assist you in selecting the proper cable for your application,
both the suggested working voltages and the maximum temperature
ratings are indicated for each applicable product in this section.
　

Most of our multi-conductor cables are available from stock. Many
of these are available off the shelf from distributors. If you have a
new or unusual application or you cannot find a multi-conductor
cable in this catalog section that meets your technical requirements,
contact Technical Support at 1-800-BELDEN-1.
　

Multi-Conductor Cables Packaging
Belden’s unique UnReel® cable dispenser is available for many of
the multi-conductor products listed in this section. The letter “U”
before the specified put-up length denotes UnReel packaging