These connectors have a D-Sub and M12
interface with 35°, 90° or 180° cable outlets.
All versions support data rates of up to
12 Mbit/s and feature compact die-cast
zinc housings with test socket and active
terminating resistor. The connectors also boast
quick-connection technology that enables
Profibus DP devices to connect with M12
Profibus cord sets simply and securely without
the use of tools, resulting in the reduction
of downtime for machinery and equipment
when faults occur, while increasing production
efficiency.
　

The connectors meet the requirements for
degree of protection IP30 and are suitable for
use in temperature ranges from -20° to +70°
C. The following housing dimensions (height
x width x depth) are available: 59 x 45 x 16.8
mm for 35° cable outlets, 68 x 42 x 16.8 mm
for 90° cable outlets, and 84.8 x 35.6 x 16.8
mm for 180° cable outlets. A special shielding
geometry and the die-cast zinc housing
ensure error- and loss-free data transmission.
　

The 9-pole D-Sub interfaces of the male and
female connectors can connect high-level
control systems, decentralized I/O stations,
programming units or diagnostic devices. The
B-coded M12 interfaces serve as a Profibus
input or output and the signals can be daisychained
via the output.
　

A slide switch activates the terminating
resistor with the respective status indicated
through the position of the switch and the
green and red color-coding on the housing.
In addition, an external Profibus terminating
resistor can attach to the Profibus output port.
　

Benefits at a Glance:

• Tool-less quick-connection technology
• Compact, die-cast zinc housing
• Data rates of up to 12 Mbit/s
• Protection standards: IP30 (D-SUB) and
IP 67 (M12)
• Temperature range: -20°C to +70°C
• Activatable terminating resistor
• Models with different cable outlets
Lumberg Automation Profibus
D-SUB to M12 Connectors
Improve Install Time and
Reducing Wiring Errors.