Special PVC single core with increased heat-resistance up to 90°C acc. to DIN VDE 0285-525-2-31/ DIN EN 50525-2-31
Temperature range flexing +5°C to +90°C
max. Temperature at conductor under permanent load: +90°C
Nominal voltage U0/U 450/750 V
Test voltage 2000 V
Insulation resistance min. 20 MOhm x km
Minimum bending radius 10-15x core Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Cable structure
Bare copper-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
Core insulation of heat-resistant PVC compound type TI3 to DIN VDE 0207-363-3/DIN EN 50363-3
Core identification see table below
Properties
Heat-resistant special PVC compound of selected stabilizer and plasticizer
Not to be used in contact with objects higher than 85°C
The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
Tests
PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Application
Therm insulated wires are ideal for use in power current installation, switch cabinets, motors and transformers which are subject to direct contact with high temperatures (e. g. varnishing machines and drying towers etc.). These are also suitable for inside wiring of electrical equipments such as lighting and heating apparatus. Suitable for fixed protected installation in, or on lighting or controlgear for voltages up to 1000 V a.c. or, up to 750 V d.c. to earth. CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.