• Special PVC cable with increased
  heat-resistance adapted to
  DIN VDE 0285-525-2-11 /
  DIN EN 50525-2-11
  0,5-0,75 mm² acc. to IEC 60227/56
  1,0-2,5 mm² acc. to IEC 60227/57
• Temperature range
  flexing -5°C to +105°C
  fixed installation -30°C to +105°C
  (for short time +120°C)
• Nominal voltage
  0,5-1 mm² U₀/U 300/500 V
  from 1,5 mm² U₀/U 450/750 V
• Spark-test 6000 V
• Test voltage 2000 V
• Breakdown voltage min. 4000 V
• Insulation resistance
  min. 20 MOhm x km
• Minimum bending radius
  flexing 7,5x cable Ø
  fixed installation 4x cable Ø
• Radiation resistance
  up to 80x10⁶ cJ/kg (up to 80 Mrad)

• Bare copper-conductor, to
  DIN VDE 0295 cl.5, fine-wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insualtion of special PVC
  compound type TI3 to
  DIN VDE 0207-363-3 / DIN EN 50363-3
• Core identification to DIN VDE 0293-308
  - up to 5 cores coloured
  - from 6 cores, black with continuous
  white numbering
• GN-YE conductor, 3 cores and above
  in the outer layer
• Cores stranded in layers with
  optimal lay-length
• Outer sheath of special PVC, heat-
  resistant compound type TM3 to
  DIN VDE 0207-363-4-1/DIN EN 50363-4-1
• Outer sheath black (RAL 9005),
  also available in other colours on request
• with meter marking

• The materials used in manufacture are
  cadmium-free and contain no silicone
  and free from substances harmful to
  the wetting properties of lacquers

Tests

• PVC self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)

• G = with green-yellow conductor
  x = without green-yellow conductor
• AWG sizes are approximate equivalent
  values. The actual cross-section is in mm².
• On request
  HELUTHERM^® 120 H03V2V2-F
  HELUTHERM^® 120 H05V2V2-F
  HELUTHERM^® 120 (H)05V2V2-F