• Fluorinated polymeric insulation FEP
  (Fluorethylenepropylene)
• Temperature range
  -100°C to +205°C
  (for short time +230°C)
• Conductor temperature range
  bare copper +130°C
  tinned copper +180°C
  silver pl. copper +200°C
• Nominal voltage 600 V
• Test voltage 2500 V
• Insulation resistance
  min. 2 GOhm x km
• Minimum bending radius
  flexing 15x cable Ø
  fixed installation 4x cable Ø
• Radiation resistance
  up to 1x10⁶ cJ/kg (up to 1 Mrad)

• Copper-conductor, bare, tinned, silver
  to DIN VDE 0295 cl.5, fine-wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of FEP-HELUFLON^®
• Core identification to DIN VDE 0293-308
  - up to 0,25 mm² cores coloured
  - from 0,5 mm² black cores with
  continuous white numbering
• GN-YE conductor, 3 cores and above
• Cores stranded in layers with
  optimal lay-length
• Outer sheath of FEP-HELUFLON^®
• Sheath colour black (RAL 9005)

• Higher insulation resistance
• Low dielectric loss
• Not flammable
• Resistant to micro-cultures
• Do not permit any fungus-formation
• Absolute ozone resistant
• Absolute weather resistant
• Water absorption <>
• Minimal water vapour permeability (approx.
  0,18 mgr/cm² in 24 hours)
• The materials used in manufacture are
  cadmium-free and contain no silicone
  and free from substances harmful to
  the wetting properties of lacquers

Tests

• self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)

• G = with green-yellow conductor
• x = without green-yellow conductor (OZ)
• AWG sizes are approximate equivalent
  values. The actual cross-section is in mm².