• adapted to DIN VDE 0285-525-2-83/
  DIN EN 50525-2-83
  
• Temperature range
  flexing -25°C to +180°C
  fixed installation -60°C to +180°C
  
• Nominal voltage U₀/U 300/500 V
• Test voltage 2000 V
• Insulation resistance
  min. 200 MOhm x km
• Minimum bending radius
  flexing 10x cable Ø
  fixed installation 5x cable Ø
• Coupling resistance
  max. 250 Ohm/km
• Radiation resistance
  up to 20x10⁶ cJ/kg (up to 20 Mrad)

Tests

• Insulation integrity
  testet acc. to DIN VDE 0472 part 814
  and IEC 60331
• Halogen-free
  acc. to DIN VDE 0482 part 267,
  DIN EN 50267-2-1, IEC 60754-1
  (equivalent DIN VDE 0472 part 815)
• Behaviour in fire
  no flame propagation acc. to
  DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2,IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)
• Corrosiveness of combustion gases
  acc. to DIN VDE 0482 part 267,
  DIN EN 50267-2-2, IEC 60754-2
  

• Tinned copper-conductor, to
  DIN VDE 0295 cl.5, fine-wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of special silicone
  compound type EI2 to
  DIN VDE 0207-363-1 / DIN EN 50363-1
• Core identification to DIN VDE 0293-308
  - up to 5 cores coloured
  - from 6 cores, black with continuous
  white numbering
• GN-YE conductor, 3 cores and above
  in the outer layer
• Cores stranded in layers with
  optimal lay-length
• Inner sheath of special silicone
• Tinned copper braided screen,
  approx. 85% coverage
• Outer sheath of special silicone
  compound type 2GM1 to
  DIN VDE 0207-363-2-1/DIN EN 50363-2-1
• Sheath colour black (RAL 9005)
• with meter marking

• Smoke density - low
• Due to the special abrasive and notch
  resistance outer sheath, these cables are
  suitable for heavy loading of mechanical
  stresses than the usual standard silicone
  cables
• Hardly changes of dielectric strength and
  the insulation resistance also at high
  temperatures
• High ignition or flash point
• In case of fire, forms an insulating layer of SiO₂
• Resistant to
  High molecular oils, fats from vegetables
  and animals, alcohols, plasticizers and
  clophenes, diluted acids, lyes and salt
  dissolution, oxidation substances, tropical
  influences and weather, lake water, oxygen,
  ozone

• G = with green-yellow conductor
  x = without green-yellow conductor
• AWG sizes are approximate equivalent
  values. The actual cross-section is in mm².
• EWKF = Improved values to E=tearing
  resistance, W=breaking strength propagation,
  K=notch strength, F=flexibility
• unscreened analogue type:
  THERMFLEX^® 180 EWKF