Largely oil-resistant, for oil-/ chemical Resistance see Technical Information table
The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
Tests
PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Note
AWG sizes are approximate equivalent values. The actual cross-section is in mm².
Application
These feedback cables are used in machinery and control construction as well as in plant engineering as these enable an excellent transmission of data and signals. Additional cores for the power supply to individual components are available. EMC = Electromagnetic compatibillity To optimize the EMC features we recommend a large round contact of the copper braiding on both ends. CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
Feedback cables PVC
EMC-preferred type, meter marking
Technical data
Special core and sheath compound of PVC
Temperature range flexing -5°C to +70°C fixed installation -30°C to +80°C
Nominal voltage 350 V
Test voltage core/core 2000 V core/screen 1000 V
Insulation resistance min. 20 MOhm x km
Minimum bending radius 10x cable Ø
Coupling resistance max. 250 Ohm/km
Cable structure
Bare copper, fine and/or ultra-fine wire conductors acc. to DIN VDE 0295 cl.5 and/or IEC 60228
Core insulation of PVC
Part No. 22800 Cu-screen of single pairs and PVC sheath
Core identification see table below
Single cores or pairs stranded in layer with optimal lay-length
Largely oil-resistant, for oil-/ chemical Resistance see Technical Information table
The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
Tests
PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)