• Special motor power supply cable for
  frequency converters
• Temperature range
  flexing -5°C to +70°C
  fixed installation -40°C to +80°C
• Permissible operating temperature
  at conductor +90°C
• Nominal voltage U₀/U 600/1000 V
• Max. operating voltage
  A.C. and 3-phase 700/1200 V
  DC operation 900/1800 V
• Test voltage 2500 V
• Insulation resistance
  min. 200 MOhm x km
• Coupling resistance
  acc. to different cross-sections
  max. 250 Ohm/km
• Mutual capacitance
  acc. to different cross-sections
  core/core 70 to 250 nF/km
  core/screen 110 to 410 nF/km
• Minimum bending radius
  free-movement for outer Ø:
  up to 12 mm: 10x cable Ø
  > 12-20 mm: 15x cable Ø
  > 20 mm: 20x cable Ø
  fixed installation for outer Ø:
  up to 12 mm: 5x cable Ø
  > 12-20 mm: 7,5x cable Ø
  > 20 mm: 10x cable Ø
• Radiation-resistance
  up to 80x10⁶ cJ/kg (up to 80 Mrad)

• Bare copper-conductor, to
  DIN VDE 0295 cl.5, fine-wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insualtion of special Polymer
• Core identification to DIN VDE 0293-308
  - up to 5 cores coloured
  - from 7 cores, black with continuous
  white numbering
• GN-YE conductor
• Cores stranded in concentric layers
• 1. Screen with special aluminium film
  2. Tinned copper braided screen,
  approx. 80% coverage
• Outer sheath of special PUR
• Sheath colour orange (RAL 2003)
• with meter marking

• Special polymerinsulation ensures low
  dielectric losses, a dual voltage resistance,
  longer service life and low - interference
  shield, and increased current carrying
  capacity
• Low coupling resistance for high
  electromagnetic compatibility
• UV-resistant
• Outdoor application
• This screened motor supply cable with
  low mutual capacitance of the single
  cores because of the special Polymer
  core insulation and low screen capacitance
  enable a low-loss transmission of the
  power compared to PVC-sheathed
  connecting cables
• Due to the optimal screening an
  interference-free operation of frequency
  converters is obtained
• Design acc. to the requirements of
  VdS 3501:2006-04
• The materials used in manufacture are
  cadmium-free and contain no silicone
  and free from substances harmful to
  the wetting properties of lacquers

Tests

• Low mutual capacitance, test acc. to
  DIN VDE 0472 part 504, test method B
• Meets EMC requirements acc. to
  EN 55011 and DIN VDE 0875 part 11

• AWG sizes are approximate equivalent
  values. The actual cross-section is in mm².