Armored Cable
Accessories
Metal-clad Fittings
T&B PR1406V2-20229.eps
Star Teck Extreme
SPECIFICATIONS
1. Use where corrugated-jacket, metal-clad cable is exposed to intermittent or continuous moisture
and is teminated into a threaded opening, the connector is a watertight type furnished with:
a.) An elastomeric beveled bushing or bushings
b.) A funnel entry, splined gland nut
c.) A non-magnetic stainless steel or bronze with nickel plate grounding device with dual grounding fingers
d.) A taper threaded hub
e.) A hexagonal body and gland nut
2. A synthetic rubber sealing device is captivated in a face groove providing optimized sealing even on irregular surfaces. This configuration also prevents over-compression of
the seal
3. Aluminum connector for single-conductor cable and corrosive environments
4. For jacketed and nonjacketed interlocked armor cable provides external bonding/grounding teeth capable of penetrating surface finishes to contact enclosure base metal
5. Incorporates an easily-removable armor-stop (not requiring fitting disassembly) ensuring proper positioning of the cable armor during cable termination
CERTIFICATIONS:
STE* STEX**
Ordinary location Ordinary location
Class I, Division 2 Class I, Division 2, Groups A, B, C, D
NEMA 4, 4X, 6P Class II, Division 1, Groups E, F, G
** These fittings are suitable for Class I hazardous locations when used in combination with a certified Class I hazardous location sealing fitting.
** May be used in hazardous areas with approved MC type cable (or equal) when installed in accordance with NEC/CEC requirements.
APPLICATIONS
Metal-clad fittings for a broad range of jacketed and nonjacketed interlocked armor cable.
Available in hub sizes from 0.50 in. to 4.0 in. and will handle outer-jacket diameters from 0.525 in. to 4.340 in.
Approximate dimensions before installation.
MATERIAL DESCRIPTORS:
Aluminum is standard material. To specify other material, add the appropriate suffix to the Part No. (e.g. STE-050GR).
The body and gland nut on hub sizes 0.50 in. to 1 in. are made of steel and 1.25 in. to 4 in. are made of malleable iron.
Desired Material Suffix
Aluminum fitting with ground locknut GR
Steel with zinc plate S
Brass with nickel plate BN
Aluminum with PVC coating PVC
Steel with PVC coating S-PVC
Stainless steel SS