1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜

    A- PRYSMIAN CABLES & SYSTEMS XLP/High-strength Airbag layer/PVC MV-105 ICEA S-93-639 (WC74)and UL 1072 CT 105°C, 5KV 3芯耐高壓AirGuard控制電纜
    看原圖
    		5642487




    商品編號: A-3AE-0203

    A- PRYSMIAN CABLES & SYSTEMS XLP/High-strength Airbag layer/PVC MV-105 ICEA S-93-639 (WC74)and UL 1072 CT 105°C, 5KV 3芯耐高壓AirGuard控制電纜

    For installations in both exposed and concealed locations in accordance with NEC. For installation in wet and dry locations in accordance with NEC. May be directly buried or
    embedded in concrete. For installation on cable trays, troughs, metal racks, aerial installation and continuous rigid cable supports in accordance with NEC. Suitable for
    vertical riser. Suitable for Class I Division 2 locations.




    ★★★★商品說明★★★★

    Armored Cable
    　

    AirGuard 5KV

    PRYSMIAN CABLES & SYSTEMS
    EPR insulation
    High-strength Airbag layer over core
    PVC jacket
    　

    SPECIFICATIONS
    1. CONDUCTOR:    Class B Compact concentric strand soft-drawn annealed copper per ASTM
    2. CONDUCTOR SHIELD:Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation
    3. INSULATION: Natural high dielectric strength EPROTENAX EPR-based insulation, combined with other materials and agents that enhance the electrical and mechanical
    characteristics assuring extended cable life
    4. METALLIC SHIELD:Helically applied non-magnetic copper tape(s) over insulation shield with a minimum overlap of 15%. An aluminum/polyester ribbon is longitudinally applied
    under the copper tape shield for phase identification - one conductor with red, one conductor with blue, and one conductor with black
    5. GROUNDING CONDUCTORS: Bare stranded copper conductor, one in each interstice, per UL, ICEA and ASTM
    6. ASSEMBLY: Phase identified shielded conductors cabled with fillers and grounding conductor (as specified), forming a firm and cylindrical cable core. A binder tape is applied
    to maintain core symmetry and mechanical stability
    7. MECHANICAL PROTECTION: High-strength and high-crush-resistant Airbag layer extruded cover the core assembly
    8. CHEMICAL PROTECTION:A layer of Drylam which consists of aluminum tape and a chemical-resistant extruded polymer layer is applied
    9. JACKET: Sunlight-resistant Polyvinyl Chloride (PVC) jacket
    10.STANDARDS: Listed Type MV-105 per UL 1072 and MSHA Type MP, meets ICEA S-93-639 (WC74) requirements. Identified for CT use. Cable passes IEEE 1202/FT4 (70,000 Btu/hr)
    and ICEA T-29-520 (210,000 Btu/hr) flame tests
    11.AMPACITY: Based on an ambient temperature of 40°C, cable isolated in air per 2008 NEC table 310.71
    12.TEMPERATURE:105°C
    13.VOLTAGE: 5 kV
    　

    APPLICATIONS
    For installations in both exposed and concealed locations in accordance with NEC. For installation in wet and dry locations in accordance with NEC. May be directly buried or
    embedded in concrete. For installation on cable trays, troughs, metal racks, aerial installation and continuous rigid cable supports in accordance with NEC. Suitable for
    vertical riser. Suitable for Class I Division 2 locations.
    AIRGUARD 5 KV/8 KV UL TYPE MV-105