1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-Armor Cable 1 金屬鎧裝電纜

    A-XLPE/Aluminum interlocked armor/PVC Four Conductor Armored Cable 90°C, 600 V 4芯波浪狀鋁管鎧裝控制電纜
    看原圖
    		5258959




    商品編號: A-7A-0804A

    A-XLPE/Aluminum interlocked armor/PVC Four Conductor Armored Cable 90°C, 600 V 4芯波浪狀鋁管鎧裝控制電纜

    For use in power circuits in industrial plants,commercial buildings, and central and sub-stationutility applications. May be installed in trays, racks,hangers, etc., eliminating the need for conduit.Suitable for indoor and outdoor installation.



    ★★★★商品說明★★★★

    Armored Cable
    Interlocked Armor

    600 V Four Conductor

    Aluminum interlocked armor
    XLP insulation
    90°C, 600 V
    　

    SPECIFICATIONS
    1. CONDUCTOR:     Class B stranded, bare, annealed copper per ASTM B3 and B8
    2. INSULATION: Cross-Linked Polyethylene (XLP) Type XHHW-2, conductors are identified by numbering
    3. ASSEMBLY:The insulated conductors and uninsulated, bare copper ground wire(s) are cabled with fillers to make round
    4. ARMOR: Aluminum interlocked armor
    5. OVERALL JACKET: Black, sunlight-resistant Polyvinyl Chloride (PVC)
    6. STANDARDS:Cables meet the UL 1685 and IEEE 1202 70,000 Btu/hr vertical tray flame tests and are marked "for CT use", individual conductors listed Type XHHW-2 per UL 44,
    completed cable listed Type MC per UL 1569
    7. AMPACITY: Based on not more than three conductors in raceway or cable or earth at an ambient temperature of 30°C per 2008 NEC table 310.16. All multiconductor values
    have been derated per 2008 NEC Table 310.15(B)(2)(a)
    8. TEMPERATURE: 90°C
    9. VOLTAGE: 600 V


    APPLICATIONS
    For use in power circuits in industrial plants, commercial buildings, and central and substation utility applications. May be installed in trays, racks, hangers, etc.,
    eliminating the need for conduit. Suitable for indoor and outdoor installation.