1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-Armor Cable 1 金屬鎧裝電纜

    A-EPR/Aluminum interlocked armor/PVC 2,400 V 90°C Three Conductor Nonshielded Armored Cable EPR/PVC 3芯耐高壓波浪狀鋁管鎧裝控制電纜
    看原圖
    		5258960




    商品編號: A-7B-0603A

    A-EPR/Aluminum interlocked armor/PVC 2,400 V 90°C Three Conductor Nonshielded Armored Cable EPR/PVC 3芯耐高壓波浪狀鋁管鎧裝控制電纜

    For use in power circuits in industrial plants,commercial buildings, and central and sub-stationutility applications. May be installed in trays, racks,hangers, etc., eliminating the need for conduit.Suitable for indoor and outdoor installation.



    ★★★★商品說明★★★★

    Armored Cable
    Interlocked Armor

    2,400 V Three Conductor Nonshielded

    SPECIFICATIONS
    1. CONDUCTOR:     Class B stranded, bare, annealed copper per ASTM B3, strand shield is an extruded
    semiconducting material
    2. INSULATION: Ethylene Propylene Rubber (EPR), insulated phase conductors are numbered
    3. ASSEMBLY: The three-phase conductors are cabled with a Class B stranded, uninsulated ground wire and fillers to make round, a binder tape is applied overall
    4. ARMOR: Aluminum interlocked armor
    5. OVERALL JACKET:Yellow, extruded, sunlight-resistant Polyvinyl Chloride (PVC)
    6. STANDARDS:UL Listed Type MV-90 per UL 1072 and Type MC per UL 1569, cable meets requirements of ICEA S-96-659 (NEMA WC 71). Cables are listed "for CT use" and meet
    the IEEE1202 (70,000 Btu/hr) and ICEA T-29-520 (210,000 Btu/hr) flame tests
    7. AMPACITY: Based on a three-conductor cable isolated in air with a conductor temperature of 90°C and an ambient temperature of 40°C per 2008 NEC table 310.71
    8. TEMPERATURE: 90°C
    9. VOLTAGE:2,400 V
    　

    APPLICATIONS
    For use in power circuits in industrial plants, commercial buildings, and central and substation utility applications. May be installed in trays, racks, hangers, etc.,
    eliminating the need for conduit. Suitable for indoor and outdoor installation.