600V MULTI CONDUCTOR
Aluminum Armor
XLP Insulation
Inner and Outer PVC Jackets
90°C, UL & CSA 600V

APPLICATIONS:
For use in control circuits in industrial plants,commercial buildings, and central and substation
utility applications. May be installed intrays, racks, hangers, etc., eliminating the need
for conduit. Suitable for indoor and outdoor installation.

SPECIFICATIONS:
1. CONDUCTOR: Class B stranded, bare, annealed copper per ASTM B-3, B-8.
2. INSULATION: Cross-linked polyethylene (XLP) per ICEA S-73-532 (NEMA WC57), Type
XHHW-2 requirements of UL and RW90 requirements of CSA. Color coding is Method 1,
Table E-2 (formerly K-2) (2 & 3 conductors) or Method 4 (4 or more conductors).
3. ASSEMBLY: The insulated conductors are cabled with a single UL, uninsulated ground wire and
fillers to make round.
4. INNER JACKET: Black, sunlight resistant polyvinyl chloride (PVC) applied per ICEA.
Jacket is low acid gas per CSA C22.2 No. 0.3.
5. ARMOR: An aluminum interlocked armor is applied overall in accordance with UL 1569,
ICEA and CSA.
6. OVERALL JACKET: Black, sunlight resistant polyvinyl chloride (PVC) applied overall per
ICEA. Jacket is low acid gas per CSA C22.2 No. 0.3.
7. STANDARDS: Cables meet UL, IEEE 383 and FT-4 70,000 BTU flame tests, and are
marked “FOR CT USE.’’ Also meets ICEA T-29-520 210,000 BTU flame test. Meets CSA
–40°C cold impact and bend. Individual conductors and completed cables are tested
in accordance with UL requirements for Type MC cables and CSA requirements
for Type TECK cables.
8. AMPACITY: Based on not more than three conductors in raceway or cable or earth
and an ambient temperature of 30°C per NEC 310-16. Values have been derated
for more than three conductors in accordance with the NEC.
9. TEMPERATURE: 90°C
10. VOLTAGE: UL & CSA 600 Volts