1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-Armor Cable 1 金屬鎧裝電纜

    A-PVC/nylon/corrugated Aluminum Armor/PVC UL 90°C dry, 600 V INSTRUMENTATION(CCW) Armored Cable波紋鋁管鎧裝儀錶控制電纜
    看原圖
    		5260284




    商品編號: A-7I-1601POS

    A-PVC/nylon/corrugated Aluminum Armor/PVC UL 90°C dry, 600 V INSTRUMENTATION(CCW) Armored Cable波紋鋁管鎧裝儀錶控制電纜

    For use as instrumentation cable in areas whereresistance to chemicals and flame is critical. Maybe used in wet or dry locations installed in opentray, trough or directly buried. May be installed inaccordance with NEC Art. 725.



    ★★★★商品說明★★★★

    Armored Cable
    Continuous Corrugated Weld

    600 V Instrumentation

    Continuous aluminum armor
    PVC/nylon insulation
    90°C dry, 600 V


    SPECIFICATIONS
    1. CONDUCTOR: Bare, annealed copper per ASTM B-3, class B stranded per ASTM B-8
    2. INSULATION:    Polyvinyl Chloride (PVC/nylon)
    3. COLOR CODE: ICEA Method 1, pairs: black and white, triads: black, white and red
    4. PAIR/TRIAD SHIELD: Aluminum/polyester tape with tinned copper drain wire
    5. ASSEMBLY: Components are cabled with compatible fillers and an overall binder tape
    6. OVERALL SHIELD: Aluminum/polyester tape with tinned copper drain wire
    7. INNER JACKET: Polyvinyl Chloride (PVC) with rip cord
    8. ARMOR: Impervious, seam-welded, corrugated aluminum that is pressure-tested after application
    9. OVERALL JACKET: Polyvinyl Chloride (PVC)
    10.STANDARDS: Meets UL 1569 requirements for metal-clad cables (Type MC-HL), meets the requirements of the IEEE 383, IEEE 1202 and UL 1685 70,000 Btu flame tests
    11.TEMPERATURE: 90°C
    12.VOLTAGE: 600 V


    APPLICATIONS
    For use as instrumentation cable in areas where resistance to chemicals and flame is critical. May be used in wet or dry locations installed in open tray, trough or directly
    buried. May be installed in accordance with NEC Art. 725.