1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > > An-BuildingWire(建築線)

    A-Building Wire   THW  Solid or Stranded  PVC Insulation/Jacket  75°C, 600 Volts UL-THW電線
    看原圖
    5262698




    商品編號: A-6C-1401

    A-Building Wire THW Solid or Stranded PVC Insulation/Jacket 75°C, 600 Volts UL-THW電線


    General purpose wiring for lighting and power in residential, commercial and industrial buildings, in accordance with NEC maximum conductor temperature of 75°C in wet or
    dry locations, for circuits not exceeding 600 V.




    ★★★★商品說明★★★★

    Building Wire
    PVC

    THW

    Solid or stranded
    PVC insulation/jacket
    75°C, 600 V


    SPECIFICATIONS
    1. CONDUCTOR:
    Solid or Class B stranded, annealed copper
    2. INSULATION:Polyvinyl Chloride (PVC)
    3. STANDARDS:Listed Type THW per UL 83 requirements
    4. AMPACITY:Based on not more than three conductors in raceway or cable or earth with an ambient temperature of 30°C and a conductor temperature of 75°C per 2008 NEC
    Table 310.16
    5. TEMPERATURE: 75°C
    6. VOLTAGE:600 V
     

    APPLICATIONS
    General purpose wiring for lighting and power in residential, commercial and industrial buildings, in accordance with NEC maximum conductor temperature of 75°C in wet or
    dry locations, for circuits not exceeding 600 V.