1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-BuildingWire(建築線)

    A-Building Wire Type MC Cable Aluminum/XLP/Aluminum armor 90°C 600 V 鋁導體XLPE波浪狀鋁管鎧裝建築用線
    看原圖
    		5641126

    商品編號: A-6MCA-0603

    A-Building Wire Type MC Cable Aluminum/XLP/Aluminum armor 90°C 600 V 鋁導體XLPE波浪狀鋁管鎧裝建築用線

    Feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings. Power, lighting, control and signal circuits. Can be used inair-handling spaces in accordance with 300.22 of the 2008 NEC.

    Building Wire
    　

    Type MC
    Aluminum conductor
    XLP insulation
    Aluminum interlocked armor
    90°C wet/dry, 600 V
    　

    SPECIFICATIONS
    1. CONDUCTOR:     AA-8176 Aluminum Alloy
    2. INSULATION: Cross-Linked Polyethylene (XLP) meeting the physical and electrical requirements of UL 44 for Type XHHW-2 wire
    3. EQUIPMENT GROUNDING CONDUCTOR:A combined interlocked armor and full-sized bare aluminum equipment grounding/bonding conductor is included in the cable assembly
    4. ARMOR: Lightweight aluminum interlocked
    5. STANDARDS:Conductors listed Type XHHW-2 per UL 44 requirements and conform to ICEA S-66-524 (NEMA WC7). Cable listed Type MC per UL 1569 requirements and conforms
    to Federal Specification A-A59544
    6. AMPACITY: Based on Table 310.16 of the 2008 NEC
    7. TEMPERATURE: 90°C wet/dry
    8. VOLTAGE: 600 V


    APPLICATIONS
    Feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings. Power, lighting, control and signal circuits. Can be used in
    air-handling spaces in accordance with 300.22 of the 2008 NEC.