1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)

    ANIXT-TYPE G-GC FLAT LEAD-CURED Heavy Duty EPR/Thermoset Jacket 90°C, 600/2000 Volts EPR扁平橡膠熱固熔機械馬達礦場用線 (軟質移動型)
    看原圖
    		5269486




    商品編號: ANIXT-LEAD-CURED-TypeG-GC-FLAT

    ANIXT-TYPE G-GC FLAT LEAD-CURED Heavy Duty EPR/Thermoset Jacket 90°C, 600/2000 Volts EPR扁平橡膠熱固熔機械馬達礦場用線 (軟質移動型)

    Flexible, flat cable for use on loading machines,cutting machines, shuttle cars, and other portable ormobile equipment. Especially suited for use onequipment fitted with cable-reeling devices, wheretrailing cables are subject to run-over by otherequipment, or for safety grounding of equipment.



    ★★★★商品說明★★★★

    TYPE G-GC FLAT
    LEAD CURED
    Heavy Duty
    EPR Insulation
    Thermoset Jacket
    90°C, 600/2000 Volts
    　

    APPLICATIONS:
    Flexible, flat cable for use on loading machines,
    cutting machines, shuttle cars, and other portable or
    mobile equipment. Especially suited for use on
    equipment fitted with cable-reeling devices, where
    trailing cables are subject to run-over by other
    equipment, or for safety grounding of equipment.
    　

    SPECIFICATIONS:
    1. CONDUCTOR:     Rope-stranded, tinned copper.
    2. INSULATION: Ethylene propylene rubber (EPR).
    3. GROUND CONDUCTOR: Stranded, tinned copper.
    4. GROUND CHECK CONDUCTOR: Stranded, tinned copper.
    5. ASSEMBLY: Three insulated conductors, two ground wires and one yellow ground
    check conductor, laid parallel, with thermosetting material between them as an integral
    part of the overall jacket.
    6. OVERALL JACKET: Lead-cured thermoset compound.
    7. STANDARDS: Meets the requirements of ICEA S-75-381 (NEMA WC58). Accepted by
    MSHA, and marked with the manufacturer’s P number.
    8. AMPACITY: Based on an ambient temperature of 40°C per ICEA S-75-381, Table H-1.
    9. TEMPERATURE: 90°C
    10. VOLTAGE: 600/2000 Volts