1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)

    ANIXT-SHD-GC-5kV EPR/Thermoset Jacket 90°C,5kV, 8kV and 15kV EPR橡膠熱固熔機械馬達礦場用線 (軟質移動型)
    看原圖
    		5270837




    商品編號: ANIXT-SHD-GC-5kV

    ANIXT-SHD-GC-5kV EPR/Thermoset Jacket 90°C,5kV, 8kV and 15kV EPR橡膠熱固熔機械馬達礦場用線 (軟質移動型)

    For use on open-pit mining shovels, dredges,cranes, drag lines or other mobile equipmentrequiring high-voltage cable lines capable ofwithstanding continuous flexing or reeling insevere operating environments.



    ★★★★商品說明★★★★

    SHD-GC
    5kV
    EPR Insulation
    Thermoset Jacket
    90°C Shielded
    　

    APPLICATIONS:
    For use on open-pit mining shovels, dredges,
    cranes, drag lines or other mobile equipment
    requiring high-voltage cable lines capable of
    withstanding continuous flexing or reeling in
    severe operating environments.
    　

    SPECIFICATIONS:
    1. CONDUCTOR:     Rope-stranded annealed, tinned copper.
    2. STRAND SHIELD: Extruded semi-conducting compound or tape over conductor.
    3. INSULATION: Ethylene propylene rubber (EPR) per ICEA S-75-381 (NEMA WC58).
    4. INSULATION SHIELD: Braided tinned copper shield, or combination braid shield of
    tinned copper and nylon.
    5. GROUND CONDUCTOR: Flexible stranded, coated, annealed copper.
    6. GROUND CHECK CONDUCTOR: Extra flexible 8 AWG annealed copper with yellow
    insulation.
    7. ASSEMBLY: Three conductors, two ground conductors, and one ground check
    conductor, cabled with rubber fillers as necessary to make round.
    8. OVERALL JACKET: Braid-reinforced thermoset compound.
    9. STANDARDS: Meets the requirements of ICEA S-75-381. Accepted by MSHA and
    marked with the manufacturer’s P number.
    10. AMPACITY: Based on an ambient temperature of 40°C per ICEA S-75-381, Table H-1.
    11. TEMPERATURE: 90°C
    12. VOLTAGE: 5kV, 8kV and 15kV