商品編號: A-3FE-0201-SW
Lead-free EPR/PVC Copper Tape Shield 133% Insulation Level 15 kV 銅帶隔離高壓電力電纜
For use in power circuits up to 15 kV when installed in open air, conduit, duct, or direct buried, for wet and dry locations. Used for power applications in chemical plants,
refineries, steel mills, industrial plants, utility substations and generating stations.
Power Cable
15 kV - 133% Insulation Level
Lead-free EPR/PVC Copper Tape Shield
EPR insulation
PVC jacket
Shielded
133% insulation level
Lead-free
No lube required
SPECIFICATIONS
1. CONDUCTOR: Class B stranded, annealed, bare copper per ASTM B-3, (compact stranding per ASTM B-496 is available). Strand shield is an extruded semiconducting,
thermosetting compound
2. INSULATION: Ethylene Propylene Rubber (EPR), physical and electrical properties are in accordance with ICEA S-93-639 (NEMA WC74)
3. INSULATION SHIELD: Extruded semiconducting thermoset insulation shield. Metallic shield is a helically applied 5 mil uncoated copper tape
4. OVERALL JACKET: Sunlight-resistant black Polyvinyl Chloride (PVC)
5. STANDARDS:Listed Type MV-105 per UL 1072 and meets the requirements of ICEA S-93-639. Sizes 1/0 and larger marked "for CT use" and pass UL 1685 70,000 Btu/hr
flame test
6. AMPACITY: Based on three single conductor cables in isolated conduit in air per 2008 NEC Table 310.73 with a conductor temperature of 90°C and an ambient temperature
of 40°C
7. TEMPERATURE: 105°C
8. VOLTAGE: 15 kV
APPLICATIONS
For use in power circuits up to 15 kV when installed in open air, conduit, duct, or direct buried, for wet and dry locations. Used for power applications in chemical plants,
refineries, steel mills, industrial plants, utility substations and generating stations.
|