商品編號: A-2A-1602S
PVC-Nylon/PVC Shielded 90°C, 600 V Industrial Tray Cable (UL TC) PVC尼龍絕緣PVC被覆隔離控制電纜
Designed for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission. May be used in Class I, Div. 2 and Class II, Div. 2
Hazardous Locations per NEC Art. 501 and 502. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable."
Industrial Tray Cable
PVC-Nylon/PVC Shielded
PVC-nylon insulation
Shielded
PVC jacket
90°C, 600 V
SPECIFICATIONS
1. CONDUCTORS: Class B stranded bare copper per UL 83 and 62
2. INSULATION: Polyvinyl Chloride (PVC) per UL 62 for Type TFFN (16 AWG) or UL 83 for Type THWN or THHN wire, nominal thickness is 15 mils
3. INSULATION JACKET: Each insulated conductor is jacketed with nylon meeting UL 62 for Type TFFN or UL 83 for Type THWN or THHN wire, minimum thickness is 4 mils
4. COLOR CODE: ICEA Method 1, Table E-2 (formerly K-2)
5. ASSEMBLY: Conductors are cabled with fillers where necessary to make round
6. SHIELDING:Aluminum/polyester helically applied with tinned copper drain wire
7. OVERALL JACKET: Sunlight-resistant Polyvinyl Chloride (PVC) per UL 1277
8. STANDARDS: Meets UL 1277 requirements for Type TC cables having THWN or THHN (TFFN) conductors, cables are listed for direct burial and meet the IEEE 1202, IEE 383
and UL 1685. 70,000 Btu/hr flame tests
9. AMPACITY:Based on not more than three conductors in raceway or cable or earth with an ambient temperature of 30°C per NEC Table 310.16, the values have been derated
where applicable
10.TEMPERATURE: 90ºC
11.VOLTAGE:600 V
APPLICATIONS
Designed for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission. May be used in Class I, Div. 2 and Class II, Div. 2
Hazardous Locations per NEC Art. 501 and 502. These cables also conform to Art. 392 "Cable Trays" and Art. 336 "Power and Control Tray Cable."
|