| 商品編號: ANIXT-IMSA-20-3
ANIXT-IMSA 20-3-Solid SELF-SUPPORTING AERIAL Solid TRAFFIC SIGNAL 鋼索架空自持PE/PE 交通號誌控制電纜 Solid Conductor PE/PE 75°C, 600 Volt
For use in signal systems as a self-supporting aerialcable. |
| |
| | |
玉山 / 台新 / 華南 / 萬泰 / 兆豐 / 遠東 / 新光 / 永豐 / 第一 / 彰化 / 合庫 / 日盛 / 匯豐 / 渣打國泰世華 / 台北富邦 / 大眾銀行 / 台灣中小企銀/台中商銀 / 澳盛銀行
| |
| | |
| | IMSA 20-3 SELF-SUPPORTING AERIAL Polyethylene Insulation Polyethylene Jacket 75°C, 600 Volt APPLICATIONS: For use in signal systems as a self-supporting aerial cable. SPECIFICATIONS: 1. CONDUCTORS: Bare, solid, annealed copper, conforming to the requirements of ASTM B-3, latest edition. Aerial figure 8. 2. INSULATION: The insulation compound before application to the conductors is heatstabilized polyethylene, conforming to the melt-index requirements of ASTM D-1248, 65T, Class B, Grade 4. After application to the conductors, the insulation meets all requirements of the latest IMSA Specification No. 20-3 when tested in accordance with ASTM D-1351, latest edition, and D-470, latest edition. 3. ASSEMBLY: The insulated conductors are laid up in compact cable form, and bound with a spiral wrap of moisture-resistant tape applied to lap at least 10 percent of its width. 4. MESSENGER: .25 in., 7 wire, high-strength galvanized steel. 5. OVERALL JACKET: High molecular weight polyethylene, meeting the requirements of ASTM D-1248, 65T, for Dielectric Material, Class C, Grade 5, J3. 6. STANDARDS: The completed cable meets or exceeds the latest International Municipal Signal Association (IMSA) Specification No. 20-3. 7. OVERALL DIAMETERS: Diameters shown below do not include the supporting messengers. 8. TEMPERATURE: 75°C 9. VOLTAGE: 600 Volts |
| |
|
|