1. An-Armor Cable Teck 90 & Accessories 金屬鎧裝電纜
    An-Armor Cable 1 金屬鎧裝電纜
    An-BuildingWire(建築線)
    An-Crane Festoon and Reeling Cable
    An-INDUSTRIAL TRAY CABLE (TC)
    An-Instrumentation & Tray Cable [ Industrial / Special Applications Cables - 150°C to 260°C ]
    An-Instrumentation Cable 儀俵控制電纜
    An-MINING CABLE(Thermoset Jacket)採礦業機械馬達用線(軟質)
    An-Portable Cord 輕便電纜
    An-Power Cable1 電力電纜
    An-Power Cable2 電力電纜
    An-Power Cable3 電力電纜
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-1
    An-PVC-Nylon/PVC Control Cable PVC尼龍被覆控制電纜-2
    An-PVC-Nylon/PVC Shielded Control Cable PVC尼龍被覆鋁箔隔離控制電纜
    An-PVC-Nylon/PVC-Nylon Control Cable PVC尼龍絕緣PVC尼龍被覆控制電纜
    An-Security Low-voltage Cable 低壓安全監控用線
    An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > > An-Instrumentation Cable 儀俵控制電纜

    BELDEN 3072F  PLTC  BELDEN  DATATRAY Twinax RS-232, 422 & 485 訊號傳輸線
    看原圖
    5258057

    商品編號: A-B3072F

    Belden 3072F PLTC BELDEN DATATRAY Twinax 
    RS-232, 422 & 485 訊號傳輸線


    For use in most programmable logic control systems(PLCs) and distributed control systems (DCS) inindustrial environments. May be installed in cabletray or conduit for a variety of data applications(RS-232, 422 & 485).

    BELDEN
    DATATRAY TWINAX
    Polyolefin Insulation
    PVC Jacket
    Shielded
    600 Volts


    APPLICATIONS:
    For use in most programmable logic control systems
    (PLCs) and distributed control systems (DCS) in
    industrial environments. May be installed in cable
    tray or conduit for a variety of data applications
    (RS-232, 422 & 485).


    SPECIFICATIONS:
    1. CONDUCTOR:
    Annealed, tinned copper.
    2. INSULATION: Low attenuation, flame-retardant polyolefin.
    3. SHIELD: 100% coverage aluminum/polyester and 55% coverage tinned copper braid.
    4. OVERALL JACKET: Dark blue, sunlight resistant, polyvinyl chloride (PVC).
    5. STANDARDS: Meets the UL requirements for Type PLTC cable. Meets the UL 1581 vertical
    tray 70,000 BTU flame test. Meets NEC Article 725 for Class 2 (CL2) circuits and Article 800
    for Communications general purpose (CM). Also meets CSA Type CM requirements.