EPR/CPE
SHIELDED
MULTI PAIR
EPR Insulation
CPE Jacket
90°C, 600 Volt

APPLICATIONS:
For use indoors or outdoors and for installation
in trays, troughs, channels, ducts and direct
burial. Designed for telemetering, signals, relays
and communication.
　

SPECIFICATIONS:
1. CONDUCTORS: Annealed, tinned copper in accordance with ASTM B-3 and B-33.
Concentric stranded, Class B per ASTM B-8.
2. INSULATION: Ethylene propylene rubber (EPR), per ICEA S-68-516. UL rated VW-1 conductors.
3. PAIRS/TRIADS: Each pair/triad is twisted to a 2 in. lay. Color coded: pairs black/white,
triads black/white/red with alphanumeric designation (1-ONE).
4. ASSEMBLY: The individually shielded pairs are cabled together with non-hygroscopic
and flame retardant fillers as necessary to form a circular cross section of the assembly.
A binding tape, when required, shall be applied over cable core.
5. SHIELDING: The entire cable assembly is shielded with polyester backed/aluminum tape
and tinned copper drain wire.
6. OVERALL JACKET: Flame retardant chlorinated polyethylene (CPE).
7. STANDARDS: Meets the requirements of UL 1277. Finished cable passes UL 1581
70,000 BTU and ICEA T-29-520, 210,000 BTU flame tests. UL listed as sunlight resistant
and rated for direct burial.
8. TEMPERATURE: 90°C
9. VOLTAGE: 600 Volts