1. A-High-Temperture1(高溫線)
    ANIX-SILICON RUBBER
    ANXITER-THERMOCOUPLE EXTENSION WIRE 延長溫度補償導線
    SRGK-High-Temperture(SRGK高溫線)
    ThermocoupleWire素線級熱耦 溫度補償導線
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ThermocoupleWire素線級熱耦 溫度補償導線

    ANIXT-328TYPE-E THERMOCOUPLE WIRE Type E 素線級熱耦 溫度補償導線
    看原圖
    		5257015




    商品編號: ANIXT-328TYPE-E

    ANIXT-328TYPE-E THERMOCOUPLE WIRE Type E 素線級熱耦 溫度補償導線

    TYPE E
    Positive Leg: Chromel
    Negative Leg: Constantan
    APPLICATIONS:
    Type E wires can be used in inert, oxidizing or reducing atmospheres.

    SPECIFICATIONS:


    1. ASSEMBLY: All constructions are duplex (parallel).
    2. COLOR CODE: Standard ANSI color coding is used on all thermocouple wire when type
    of insulation permits. In color coding, the right is reserved to include a tracer to identify
    the ANSI type. ANSI Type E Color Code: Positive Leg (Chromel) is Purple, Negative Leg
    (Constantan) is Red. Jacket is Brown.
    3. STANDARD: All products listed below are calibrated to the standard limits of error as
    stated in ISA/ANSI MC96.1.
    4. TEMPERATURE: Temperature ratings listed below are continuous. Single reading
    temperature ratings are available upon request.




    ★★★★商品說明★★★★


    APPLICATION:
    For temperature monitoring and control in Steel and Aluminum Mills, Pulp and Paper Mills,
    Automobile Plants, Petroleum Refineries, Chemical Plants, Material Processing Plants, Food
    Processing, Mining and Utilities.
    “328” Series Thermocouple Grade Wire — Highly accurate thermocouple wire for use in
    critical environments. Various types of insulations and jackets allow these constructions to be
    used in a wide variety of environmental conditions. Typically duplex (parallel) construction.
    “327” Series Thermocouple Extension Wire — Provides an economical way of extending
    temperature measurement for long distances. Thermocouple extension wire comes in a wide
    variety of constructions. It can be stranded or solid, armored or shielded depending on the
    environmental conditions encountered. May be UL Listed as Type PLTC.
    TYPE J: Can be used in inert, vacuum, reducing, or oxidizing atmospheres. Iron conductor
    may rust in moist or low-temperature applications.
    TYPE K: Used in inert or oxidizing atmosphere. Used in 1,500 to 1,800°F range where subjected
    to reducing or alternately reducing and oxidizing atmospheres which can impair lifespan. Accuracy
    below 900°F is greatly reduced after prolonged use above 1,400°F.
    TYPE T: Commonly used for temperatures to 700°F as well as cryogenic applications. Can be
    used in oxidizing, reducing, inert and vacuum atmospheres.
    TYPE E: Type E wires are not subject to corrosion at sub-zero temperatures. They can be
    used in inert, oxidizing, or reducing atmospheres. Because they cover a wide temperature
    range with a single calibration curve, Type E calibration is preferred for computer applications.