BNC Cable／BNC Multiple Cable

●TACHII can take care of ＢＮＣＰ-Ｋ series, ＢＮＣＰ-ＨＫ series each connector compliant to ３Ｇ-ＳＤＩ, ＨＤ-ＳＤＩ with TCX series Coaxial Cable.
●Specify cable length and color for BNCP-K series crimping BNC cable. It is also possible to set tug onterminal.
●Specify cable length and color for ＢＮＣＰ-ＨＫ series mobile cable. It is also possible to arrange and paste the identification seal (S1 and S2) listed on Page 24.
●Specify cable length and cable end variation size for multiple cable listed on Page 12. Processing on end variation foot shall be taken care for not to easily get off.

Jeep Cable for Studio Monitor and Reday

●Specify cable length, terminal end variation size and Identification seal (size M1, M2) listed on
Page 24 after selection of cable on Page 13～16.
●Specify ＳＪＰ series ＸＬＲ connector for audio whether Made by ITT Cannon or Made by
Neutrik. And,also specify power plug etc of teminal connector for power source cable.
It is possible to paste the above identification seal (M1, M2) on the foot of end variation.
●As BNC Connector, BNCP-HK series are used which are compliant to ３Ｇ-ＳＤＩ

Digital Microwave Link transmission cable for Relay

●Specialized N type connectors are mounted on both ends of coaxial cable for mobile use,
　TCX-5DFW, TCX-5DFWS for long distance transmission in Digital Microwave link.
●For N type connector, specially designed type made by Noble Musen listed on Page 25 is
　employed as standard. Specify the type of connector (Plug, Jack).
●Cap must be inserted before connector body processing. Cap cannot be inserted after connector
　processing. Cap shall be treated at about 50mm from connector body for anti-movement.
●Specify cable length and color (Standard is gray) and others.
　It is also possible to paste the identification seal listed on Page 24
　for the terminal. Seal type shall be S1.