XLR  Cable
　

1. Specity XLR Connector made by ITT Cannon, or Neutrik, for NC3MXX-B
... processing to Ｔ-４Ｅ６Ｓ（Cable color：１０ colors） mainly to XLR
...Connector, and Ｔ-２Ｔ２Ｓ, Ｔ-４Ｅ５Ｓ, Ｔ-４Ｅ６ＡＴ, Ｔ-４Ｅ５ＡＴ, Ｔ-４Ｅ６, Ｔ-４Ｅ５.
2. Specify cable length, and color. Clear shrinkable tube can be
    processed to protect XLR Connector made by ITT Cannon.
3. Identification Seal (S1, S2) can be pasted listed on Page 24.

XLR Multiple Cable

1. XLR Connector to be processed for Ｔ-４Ｅ３-Ｐ series and ＴＭＲ２０２- be taken care with clear tube.
    ＡＴ series as for Multiple Audio Cable for Relay on both ends.
2. The unit sheath is respectively reinforced by clear tube. Because
    of inside sheath visible, channel identification is easily possible as usual.
3. Selection is possible whichever XLR Connector made by ITT
    Cannon, or made by Neutrik. In case of XLR Connector made by
     ITT Cannon selected, it is possible to protect connector with
     clear shrinkable tube. Contact with our business department on
     the details.
4. Specify the cable length and end variation size.
    It is possible to paste Identification Seal (M1. M2) listed on Page 24.
5. Connector wire connection by each channel wise shall be same
    with XLR Cable. (Other requirement can be also taken care of
    respectively.）

Speaker Cable
1. XLR Connector to be processed for mounting to Ｔ-４Ｓ６, Ｔ-４Ｓ８.
    In Ｔ-４Ｓ６,T-458 specify XLR type, Made by ITT Cannon or Made by
    Neutrik. In Ｔ-４Ｓ１１, NL4FX Mady by Neutrik can be processed.
2. Specify cable length and color. In case of mounting XLR
    Connector Made by ITT Cannon, it is possible to process clear
    shrinkable tube for connector protection.
3. It is possible to paste Identification Seal (M1. M2) listed on Page 24

110Ω Digital Audio Cable

1. Cable for 110Ω Digital Audio.
2. Single type can be processed to Ｔ-ＤＡ20□ series
    and T-ＤＡ20□ＡＴ series. Specify XLR Connector
    Made by ITT Cannon, Neutrik,
3. In multiple type, both ends Ｄ-ｓｕｂ 25pin plug
    connector mounting, or Ｄ-ｓｕｂ 25pin one end and
    end variation processing of XLR type connector on
    other end is available. In end variation processing
    case , clear tube  is uded to protect unit as
    reinforcement.
4. Contact with our business department on waire
    connection and connection screw size in multiple
    type at D-sub side.
5. Specify cable length, end variation size. It is possible
    to paste Identification Seal both for single type and
    multiple type listed on Page24.