1. LAPP-Cables for Bus-System AS-INTERFACE工業級工作站傳輸信號線
    LAPP-Cables for Bus-System 工業級工作站傳輸信號線
    LAPP-Cables for BUS-Systems RS485/RS233工業級連接線
    LAPP-UNITRONIC® Active Sensor/Actuator Components
    LAPP-UNITRONIC® Fieldbus-Y connectors工業電腦連接器
    LAPP-UNITRONIC® Fieldbus工業電腦連接器
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > LAPP-Cables for Bus-System 工業級工作站傳輸信號線

    LAPP-UNITRONIC® BUS CAN 工業級連接線 120 ohms
    看原圖
    5323769




    商品編號: LAPP-UNITRONIC-BUS-CAN

    LAPP-UNITRONIC® BUS CAN 工業級連接線 120 ohms



    ★★★★商品說明★★★★

    Technical Data

    Mutual capacitance
    (800 Hz): max. 40 nF/km
    Peak working voltage
    (not for power purposes) 250 V
    Conductor resistance
    (loop): max. 186 Ohm/km
    Minimum bending radius
    Fixed installation: 8 x cable diameter
    Test voltage
    Core/core: 1500 V
    Range of temperature
    Static: -30°C up to +80°C
    Flexing: -5°C up to +70°C
    Characteristic impedance
    120 ohms

    Design

    • Stranded 7-wire bare copper conductor
    • Colour coded in accordance with DIN 47100
    • Copper braid
    • PVC outer sheath
    • Colour: violet (RAL 4001)

    Approvals (Norm references)

    • Standardised internationally in ISO 11898
    • UL/CSA type CMX (UL 444)

    Product features

    • Maximum bit rate: 1 Mbit/s for 40 m segment length
    • Larger conductor crosssection necessary with increasing lengthSee Table below (reference values from ISO 11898).
    • For the segment length, cable cross-section and bit rate, ISO 11898 makes recommendations
    • Flame retardant according to IEC 60332-1-2