1. LAPP-Cables for Bus-System AS-INTERFACE工業級工作站傳輸信號線
    LAPP-Cables for Bus-System 工業級工作站傳輸信號線
    LAPP-Cables for BUS-Systems RS485/RS233工業級連接線
    LAPP-UNITRONIC® Active Sensor/Actuator Components
    LAPP-UNITRONIC® Fieldbus-Y connectors工業電腦連接器
    LAPP-UNITRONIC® Fieldbus工業電腦連接器
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > LAPP-Cables for Bus-System 工業級工作站傳輸信號線

    LAPP-UNITRONIC® BUS CAN FD P 工業級(超柔軟移動式)連接線 120 ohms Highly flexible and UL/CSA approved
    看原圖
    5323772




    商品編號: LAPP-UNITRONIC-BUS-CAN-FD

    LAPP-UNITRONIC® BUS CAN FD P 工業級(超柔軟移動式)連接線 120 ohms Highly flexible and UL/CSA approved



    ★★★★商品說明★★★★

    Part number Article designation Number of pairs / conductor cross-section in mm² Outer diameter mm Copper index kg/km Weight kg/km   
     
    For highly flexible application (power chains, frequently moved machine parts)
    2170272 UNITRONIC® BUS CAN FD P 1 x 2 x 0,25 6.4 24 40
    2170273 UNITRONIC® BUS CAN FD P 2 x 2 x 0,25 8.4 33 65
    2170275 UNITRONIC® BUS CAN FD P 1 x 2 x 0,34 6.8 32.8 60
    2170276 UNITRONIC® BUS CAN FD P 2 x 2 x 0,34 9.6 52.4 88
    2170278 UNITRONIC® BUS CAN FD P 1 x 2 x 0,5 8 41.9 74
    2170279 UNITRONIC® BUS CAN FD P 2 x 2 x 0,5 10.8 59.4 100

    Technical Data

    Mutual capacitance
    (800 Hz): max. 60 nF/km
    Peak working voltage
    250 V (not for power applications)
    Conductor resistance
    (loop): max. 159.8 Ohm/km
    Minimum bending radius
    Flexing: 15 x cable diameter
    Test voltage
    Core/core: 1500 V
    Range of temperature
    Fixed installation: -40°C up to +80°C
    Flexing: -30°C up to +70°C
    Characteristic impedance
    120 ohms

    Design

    • Stranded bare copper conductor
    • Screen braiding made from copper wire
    • PUR outer sheath
    • Colour: violet (RAL 4001)
    • UV-resistant (but colour change after some time possible)

    Approvals (Norm references)

    • Standardised internationally in ISO 11898
    • UL/CSA type CMX (UL 444)

    Product features

    • Halogen free
    • Maximum bit rate: 1 Mbit/s for 40 m segment length
    • Larger conductor crosssection necessary with increasing lengthSee Table below (reference values from ISO 11898).
    • For the segment length, cable cross-section and bit rate, ISO 11898 makes recommendations
    • Flame retardant according to IEC 60332-1-2