1. LAPP-Accessories for INDUSTRIAL networking工業級網路連接線
    LAPP-Ethernet connector RJ45 & Crimping tool 工業級網路連接器材
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > LAPP-Accessories for INDUSTRIAL networking工業級網路連接線

    LAPP-ETHERLINE®4-pairs CAT.6a + CAT.7工業級 CAT-6A 4 Pairs網路連接線
    看原圖
    5325883




    商品編號: LAPP-ETHERLINE-4P-CAT6A

    LAPP-ETHERLINE®4-pairs CAT.6a + CAT.7工業級 CAT-6A 4 Pairs網路連接線


    ETHERLINE® 4-pairs CAT.6a + CAT.7

    ETHERNET with the globally accepted TCP/IP protocol will most probably either provide a connection to the established "Fieldbus World" or the Sensor-Actuator level.Either via a gateway to the "Fieldbus World" or straight through downwards to the lowest communication level. The transmission rates are presently either 10 Mbit/s (ETHERNET) or at least 100 Mbit/s = LAN CAT.5 requirements (Fast Ethernet = Industrial Ethernet) respectively CAT.6a or CAT.7 requirements.; CAT.6a = 500 MHz; CAT.7 = 600 MHz



    ★★★★商品說明★★★★

    Part number Article designation Number of pairs and dimensions Outer diameter in mm max. Copper index kg/km Weight kg/km   
    Conductor AWG22 = PROFINET-conform (outer sheath colour yellow-green RAL 6018) for fixed installation (solid conductor) = Type A
    2170464 ETHERLINE® Y PiMF CAT.6a 4 x 2 x AWG22/1 8,7 53 98
    2170465 ETHERLINE® P PiMF CAT.6a 4 x 2 x AWG22/1 8,7 53 91
    2170466 ETHERLINE® H PiMF CAT.6a 4 x 2 x AWG22/1 8,7 53 99
    2170474 ETHERLINE® Y PiMF CAT.7 4 x 2 x AWG22/1 8,7 53 98
    2170475 ETHERLINE® P PiMF CAT.7 4 x 2 x AWG22/1 8,7 53 91
    2170476 ETHERLINE® H PiMF CAT.7 4 x 2 x AWG22/1 8,7 53 99

    Product features

    • All ETHERLINE® cables with a cross section of AWG22 are PROFINET® compliant.
    • Characteristic impedance: 100 Ohm at 1-100 MHz