1. LAPP-Accessories for INDUSTRIAL networking工業級網路連接線
    LAPP-Ethernet connector RJ45 & Crimping tool 工業級網路連接器材
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > LAPP-Accessories for INDUSTRIAL networking工業級網路連接線

    LAPP-UNITRONIC® LAN 200 MHz - CAT.5e 網路連接線 LAN cables for structured cabling - EN 50173
    看原圖
    5326235




    商品編號: LAPP-UNITRONIC-CAT5e

    LAPP-UNITRONIC® LAN 200 MHz - CAT.5e 網路連接線 LAN cables for structured cabling - EN 50173


    UNITRONIC® LAN 200 MHz - CAT.5e  

    LAN cables for structured cabling - EN 50173

    Application range

    • Mainly used where the terminal density is very high, e.g. for wiring office, administration and development buildings in the tertiary area (floor wiring



    ★★★★商品說明★★★★

    Part number Article designation Number of pairs and dimensions Outer diameter in mm max. Copper index kg/km Weight kg/km   
     
    PVC version
    2170125 UTP 200 MHz CAT.5e 4 x 2 x AWG24/1 5,5 17 32
    2170126 FTP 200 MHz CAT.5e 4 x 2 x AWG24/1 6,1 18 42
    2170127 FTP 200 MHz CAT.5e flexible (for patchcable) 4 x 2 x AWG26/7 5,4 13 30
    2170128 S-FTP 200 MHz CAT.5e 4 x 2 x AWG24/1 6,5 32 60
    2170129 S-FTP 200 MHz CAT.5e flexible (for patchcable) 4 x 2 x AWG26/7 5,8 22 41
    2170130 S-FTP 200 MHz CAT.5e DUPLEX 2 x (4 x 2 x AWG24/1) 6,5 x 13,2 64 120
     
    Halogen-free versions
    2170136 FTP-H 200 MHz CAT.5e 4 x 2 x AWG24/1 6,1 18 43
    2170137 FTP-H 200 MHz CAT.5e flexible (for patchcable) 4 x 2 x AWG26/7 5,4 13 31
    2170138 S-FTP-H 200 MHz CAT.5e 4 x 2 x AWG24/1 6,5 32 61
    2170139 S-FTP-H 200 MHz CAT.5e flexible (for patchcable) 4 x 2 x AWG26/7 5,8 22 42
    2170140 S-FTP-H 200 MHz CAT.5e DUPLEX 2 x (4 x 2 x AWG24/1) 6,5 x 13,2 64 122

    Approvals (Norm references)

    • LAN CAT.5e cables from Lapp Kabel for "Structured cabling systems" meet the requirements in accordance with EIA/TIA-568 and TSB36 as well as ISO/IEC 11801 or EN 50173 (Class D).
    • Class D in ISO/IEC 11801 standard corresponds to CAT.5

    Product features

    • Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100 m in accordance with the ISO/IEC 11801 and EN 50173 standards (90 m in cable duct + 10 m in working area)
    • The impedance of these cables is 100 Ohm +/-15%
    • FTP and S-FTP cables are specified up to 200 MHz
    • Cables with auxiliary -H = halogen-free version