1. Belden Wire Cable 專區
    ALPHA- 電線電纜專區
    AMP/Commscope/Krone/Panduit/ Amphenol/NEX-1/Teldor-綜合佈線系列及周邊產品
    Power/Data-Cable(進口電線電纜)
    歐規電纜線 & 配件LAPP/Igus/Nexans/Habia
    日系電線電纜&配件CANARE/SUMITOMO
    BLACKBOX專區
    Hosiwell-豪斯威爾專區
    3M相關產品專賣區
    宜大-RF高頻洩波微波-同軸電纜及接頭
    宜大-Hook-Up-Wire(UL/MIL/VDE/JIS電子線)
    宜大-Computer Cable(儀表電腦網路訊號傳輸電纜線)
    宜大-CCTV/CATV寬頻.照明安全監控及電源管理.網通等器材
    宜大-交換機/光電轉換器/傳輸器/控制器
    纜線突波避雷保護器/接頭/工具/施工週邊器材
    宜大-電線專區
    宜大-電力電纜線專區
    宜大-綜合佈線系列及周邊產品專區
    宜大-自動拖鍊系統及周邊
    光電產業
    宜大-光纖專區(Optical Fibers)
    機器人用線-機械手臂用線
    Exporting Business
    Belden-New Products (2020)
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > > LAPP-Accessories for PROFIBUS工業級連接器

    LAPP-EPIC® Data PROFIBUS Connectors ATEX Screw Terminals 工業用接頭
    看原圖
    5323572




    商品編號: LAPP-EPIC-PROFIBUS-ATEX

    LAPP-EPIC® Data PROFIBUS Connectors ATEX Screw Terminals 工業用接頭


    EPIC® Data PROFIBUS Connectors ATEX Screw Terminals  

    For usage in explosion hazardous areas of zone 2 (explosiv gasatmosphereappears seldom and for very short time); Standardized interfaces; Cost saving because of quick installation; Easy to connect

    Application range

    • Automation technology
    • Mechanical engineering
    • Plant engineering
    • Tool shop
    • Control engineering



    ★★★★商品說明★★★★

    Technical Data

    Dimensions
    64 mm x 40 mm x 17 mm (LxWxH)
    Termination resistor
    Resistor combination integrated, connectable with slide switch
    Connection type
    Screwing
    Weight
    approx. 40 g
    Outgoing cable
    90°
    Interfaces
    PROFIBUS-station:    SUB-D socket, 9-pole PROFIBUS-cable:    4 terminals for wires up    to 1,0 mm²
    Degree of protection
    IP20
    Current consumption
    max. 12.5 mA
    Transmission rate
    max. 12 MBit/s
    Pollution degree
    2
    Voltage consumption
    4.75 .. 5.25 V DC (device is energized))
    Permissble ambient conditions
    Surrounding air temperature:   0°C...+60°C Transport and storage temperature:   -25°C...+80°C Relative humidity:   max. 75% at +25°C

    Design

    • Sub-D plug, 9-pole
    • Metalized housing
    • Cable outlet 90°
    • For cable diameter:   5.0 ... 8.0 mm
    • Additional with programming/diagnostic interface (-PG): Sub-D socket, 9-pole

    Approvals (Norm references)

    • Sub-D connection / pin assignment in accordance with PROFIBUS
    • EN 60079-0:2006, EN 60079-15:2005category 3G zone 2

    Product features

    • Screwing connection
    • Switchable terminating resistor integrated
    • Switch can also be operated when the connector is plugged and setting is clearly visible
    • When being used as a through connector (two cable connections, node) the switch must be in the "OFF" position, if being as a terminal resistor (one cable connection) the switch must be in the "ON" position
    • If the switch in in the "ON" position the outgoing bus cable is disconnected