1. LAPP- EPIC® CIRCON M23 Housings工業級連接器
    LAPP- EPIC® H-D Inserts 工業級連接器
    LAPP- EPIC® H-EE Inserts connectors 工業級連接器
    LAPP- EPIC® Rectangular Kits工業級連接器
    LAPP-Accessories for PROFIBUS工業級連接器
    LAPP-EPIC® Contacts tools工業級連接器 工具
    LAPP-EPIC® Data CAN-Bus 工業級連接器
    LAPP-EPIC® H-A 16 Housings工業級連接頭
    LAPP-EPIC® H-A 3 Housings工業級連接頭
    LAPP-EPIC® H-A 32 Housings工業級連接頭
    LAPP-EPIC® H-A Inserts 工業級連接器
    LAPP-EPIC® H-BE Inserts 工業級連接器
    LAPP-EPIC® H-BS H-BVE TB-H-BE Inserts工業級連接器
    LAPP-EPIC® Housing accessories工業用接頭配件
    LAPP-EPIC® H-Q 5 工業級連接器
    LAPP-EPIC® H-STA Inserts 工業級連接器
    LAPP-EPIC® MC Module工業級連接器
    LAPP-Solar connectors太陽能工業連接器
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > > LAPP-Accessories for PROFIBUS工業級連接器

    LAPP-EPIC® Data PROFIBUS Connectors 90° Screw Terminals 工業用接頭
    看原圖
    5323373




    商品編號: LAPP-EPIC-PROFIBUS-90

    LAPP-EPIC® Data PROFIBUS Connectors 90° Screw Terminals 工業用接頭


    Standardized interfaces; Cost saving because of quick installation; Easy to connect; Small housing

    Application range

    • Automation technology
    • Mechanical engineering
    • Plant engineering
    • Tool shop
    • Control engineering



    ★★★★商品說明★★★★

    Part number Article designation Outgoing cable PG Pieces / PU   
    EPIC® Data PROFIBUS Connectors
    21700504 ED-PB-90 90° No 1
    21700503 ED-PB-90-PG 90° yes 1

    Design

    • Sub-D plug, 9-pole
    • Metalized housing
    • Cable outlet 90°
    • For cable diameter:   5.0 ... 8.0 mm
    • Additional with programming/diagnostic interface (-PG): Sub-D socket, 9-pole

    Approvals (Norm references)

    • Sub-D connection / pin assignment in accordance with PROFIBUS

    Product features

    • Screwing connection
    • Switchable terminating resistor integrated
    • Switch can also be operated when the connector is plugged and setting is clearly visible
    • When being used as a through connector (two cable connections, node) the switch must be in the "OFF" position, if being as a terminal resistor (one cable connection) the switch must be in the "ON" position
    • If the switch in in the "ON" position the outgoing bus cable is disconnected