| | |
| | ÖLFLEX® CLASSIC 110 Space saving installation due to small cable diameters; High electrical performance due to 4kV test voltage Application range - Plant engineering and construction Industrial machinery Air conditioning installations Power stationStage technique
- Fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
- Dry or damp interiors under medium mechanical load conditions
Technical Data - Core identification code
Black with white numbers acc. to VDE 0293 - Specific insulation resistance
> 20 GOhm x cm - Conductor stranding
Fine wire in accordance to VDE 0295 Class 5 / IEC 60228 Class 5 - Minimum bending radius
Occasional flexing: 15 x cable diameter
Fixed installation: 4 x cable diameter - Rated voltage
U0/U: 300/500 V | - Test voltage
4000 V - Protective conductor
G = with protective conductor GN/YE
X = without protective conductor - Range of temperature
Occasional flexing: -5°C up to +70°C
Fixed installation: -40°C up to +80°C - VDE tested
VDE Reg. No. 7030 for following sizes: up to 2,5 mm²: 2 - 65 cores starting at 4 mm²: 2 - 7 cores | Design - Fine strands of bare copper wires
- PVC insulation LAPP P8/1
- Cores twisted in layers
- PVC outer sheath, grey (RAL 7001)
Approvals (Norm references) - Remark: A RoHS-non-compliant version is marketed under ÖLFLEX® 110 with VDE-REG.-Nr. 8067. To order this, please add appendix <1> to the below stated part numbers. This does not affect the above given further technical data or description.
Product features - Flame retardant according to IEC 60332-1-2
- Good chemical resistance see Appendix T1
|
| |
|
|
.jpg)
