Temperature range moving	-35 °C to +70 °C, minimum bending radius 10-12,5 x d
	Temperature range fixed	-40 °C to +70 °C, minimum bending radius 5 x d
	v max. unsupported/gliding	10 m/s, 6 m/s
	a max.	100 m/s²
	Length of travel	Unsupported and gliding travel distances up to 400 m, Class 4.
	UV-resistant	Medium
	Nominal voltage	30 V
	Test voltage	500 V
	Oil	Oil resistant (according to DIN EN 60811-2-1), resistant to organic oils (according to VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4.
	flame-retardant	According to IEC 332-1, CEI 20-35, FT1
	Silicon-free	Free from silicon which can affect paint adhesion (following PV 3.10.7 – status 1992).
	conductor	Fine-wire stranded conductor in especially bending-resistant version consisting of bare copper wires (following EN 60228).
	Core insulation	According to Bus specification
	Core stranding	According to Bus specification
	Core identification	According to bus specification, see product range
	Inner jacket	TPE mixture suited to the requirements in E-Chains®.
	Entire shield	Extremely bending resistant, tin-plated braided copper shield. Cover about 70% linear, about 90% optical.
	Outer jacket	Low-adhesion, especially abrasion-resistant and highly bending-resistant mixture in TPE base suited to the requirements in E-Chain® systems. Colour: violet (similar to RAL 4001)
	UL/CSA	Style 1589 and 21371, 30 V, 80°C
	CEI	Following CEI 20-35
	CE	Following 2006/95/EG
	DESINA	According to VDW, DESINA standardization
	Lead-free	Following EU guideline (RoHS) 2002/95/EC
	Cleanroom	According to ISO Class 1. Outer jacket material corresponds to CF34.25.04, tested by IPA according to standard 14644-1

Typical application areas

• for maximum load requirements
• Virtually unrestricted oil resistance, even against organic oils
• Indoor and outdoor applications without direct sunlight
• Especially for unsupported and gliding travels up to 400m
• Bus cable for storage and retrieval units for high-bay warehouses, machining equipment/machine tools, quick handling, cleanroom, semiconductor assembly, indoor cranes, low-temperature applications

Technical instructions:
The USB, FireWire and GigE cables listed on this page have been developed and manufactured for the mechanically demanding industrial application in E-Chain® systems. High proofness to oil and lubricants is as secured as protection against electromagnetical interferences. This high mechanical service life was reached with the usage of high quality materials which even care for the electrical safeness. However, communication problems between the systems can occur in individual cases, if very different hardware and software products are combined. Therefore, we recommend the prior testing of all components of the entire system with the cables. Of course we support you with the details of these electrical tests. Just give us a call! Just give us a call!