1. IGUS-Chainflex® 同轴电缆
    IGUS-Chainflex® 伺服电缆
    IGUS-Chainflex® 量測系統電纜
    IGUS-Chainflex® 动力电缆
    IGUS-Chainflex® 数据电缆
  2. 產品搜尋
    分 類:

    首頁 > IGUS-Chainflex® 动力电缆

    IGUS-CF CRANE -Igupren 动力电缆

    商品編號: IGUS-CF-CRANE

    IGUS-CF CRANE -Igupren 动力电缆





    最小弯曲半径为: 10 xd


    Chainflex® CFCRANE 6/10 kv



    1. Highly flexible special conductor
    2. Extruded EPR insulation over conductive rubber
    3. Highly flexible overall copper shield
    4. Extruded, highly abrasion-resistant iguprene jacket blend

    • For maximum voltages and outputs
    • igupren outer jacket
    • Oil-resistant
    • flame-retardant


    Classification of the Chainflex® cable:
    Class 6.4.3
    6: Cables for continuous movement in E-Chains® for ultimate heavy-duty use, for radii from 5 x d, speed up to 10 m/s
    Travel distance:
    4: unsupported and sliding up to 400 m and above
    Resistance to oil:
    3: Oil-resistant according to EN 60811-2-1, DIN EN 50363-10-2


    Chainflex® CFCRANE 6/10 kv
    Cable design :
    Protection cable : without protective conductor
    Outer diameter [mm]: 27
    Copper index [kg/km]: 468
    Weight [kg/km]: 940
    Part No. :
    Delivery time on request
    Note: The mentioned external diameters are maximum values and may tend toward lower tolerance limits.


    Temperature range moving -20 °C to +80 °C, minimum bending radius 10 x d
    Temperature range fixed -30 °C to +80 °C, minimum bending radius 7,5 x d
    v max. unsupported/gliding 10 m/s, 6 m/s
    a max. 50 m/s²
    Length of travel Unsupported and sliding travel distances up to 500 m and over, Class 4
    UV-resistant high
    Nominal voltage 6/10 kV (following DIN VDE 0250), other voltages upon inquiry.
    Test voltage 17 kV (following DIN VDE 0250, Part 813)
    Oil Oil-resistant (following DIN EN 60811-2-1) Class 3.
    flame-retardant According to IEC 332-1, CEI 20-35, FT1
    Silicon-free Free from silicon which can affect paint adhesion (following PV 3.10.7 – status 1992).
    conductor Highly flexible cable consisting of tinned copper wires (following VDE 0295).
    Core insulation Inner and outer conductor layer made of conductive rubber. Insulating cover made of high-quality, heat-resistant and ozone-resistant ethylene-propylene-rubber (EPR)
    Entire shield Extremely flexible, tin-plated copper shield. Shield about 80% optical.
    Outer jacket Low-adhesion mixture on the basis of iguprene, especially abrasion-resistant and highly flexible, adapted to suit the requirements in Energy Chains® (following DIN VDE 0207 Part 21). Color: red
    CE Following 2006/95/EG
    Lead-free Following EU guideline (RoHS) 2002/95/EC
    Typical application areas
    • for maximum load requirements
    • Almost unrestricted oil resistance
    • Indoor and outdoor applications, UV-resistant
    • Especially for freely suspended and gliding travel distances up to 500 m and more
    • Outdoor ship to shore, crane applications, conveyer technology