商品編號: ALPHA-FIT-321-1-4
ALPHA-FIT-321-1/4 熱縮管 Shrink Ratio 3:1 Dual Wall Flexible PO Thk Wall -55 to 125
Part # |
Shrink Ratio |
Material |
Min Supplied ID |
Max Recovered ID |
Nom Recovered Wall |
Temperature |
Ratings |
FIT-321-1/4 |
3:1 |
Dual Wall Flexible PO Thk Wall |
0.24 |
0.81 |
0.04 |
-55 to 125 |
AMS DTL-23053/4 Class 3, CA Prop 65, CSA 198, RoHS, UL 224 |
|
Construction
1) Tubing Type |
Dual Wall Heat Shrinkable Tubing |
2) Tubing Material |
Dual Wall Flexible PO w/Thick Wall Adhesive |
3) Minimum Supplied ID(In) |
0.240 |
4) Maximum Recovered ID (In) |
0.080 |
5) Nominal Recovered Wall Thickness(In) |
0.040 |
6) Nominal Recovered Melt Wall (In) |
0.020 |
7) Color(s) |
BLACK |
Applicable Specifications
1) UL |
All Tubing Flame Test |
|
|
Standard 224 |
125°C / 600 VRMS |
2) CSA International |
Standard 198 |
|
3) Other |
AMS-DTL-23053/4, Class 3 |
|
Environmental
1) EU Directive 2002/95/EC(RoHS): |
|
All materials used in the manufacture of this part are in compliance with EU Directive 2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire's web site for compliance Date of Manufacture. |
2) California Proposition 65: |
The outer surface materials used in the manufacture of this part meet the requirements of California Proposition 65. |
Properties
Physical & Mechanical Properties |
1) Temperature Range |
-55 to 125°C |
|
2) Shrink Ratio |
Approximately 3:1 |
|
3) Full Recovery Temperature |
110°C |
|
4) Minimum Shrink Temperature |
110°C |
|
5) Tensile Strength |
1500psi, Min |
ASTM D638 |
6) Elongation |
250%, Min |
ASTM D638 |
7) Cold Impact(-55°C) |
no cracking |
ASTM D746 |
8) Heat Shock(250°C,4hrs) |
no cracking |
AMS-DTL-23053 |
9) Secant Modulus |
2.5x10 4 psi, Min |
ASTM D882 |
10) Longitudinal Change |
+1%/-15% |
AMS-DTL-23053 |
11) Shelf Life |
3 Years @ 18 to 35°C |
|
Electrical Properties |
1) Dielectric Strength |
300 V/mil, Min |
ASTM D876 |
2) Volume Resistivity |
1x10 12 ohm-cm, Min |
ASTM D876 |
Chemical Properties |
1) Water Absorption |
1.00%, Max |
ASTM D570 |
2) Corrosion(0°C,16hrs) |
no corrosion |
AMS-DTL-23053 |
3) Fluid Resistance(23°C,24 Hrs) |
900 PSI, Min |
AMS-DTL-23053 |
4) Fungus Resistance |
Pass |
AMS-DTL-23053 |
5) Halogen Free |
No |
|
6) Lead Free |
Yes |
|
Other
Packaging |
25X4 FT, 20X6 IN |
Our FIT heat-shrink tubing offers a reliable way to protect and seal terminations or add additional mechanical ruggedness. FIT preferred heatshrink products are made from premium compounds under the tightest manufacturing controls. This means FIT will consistently have excellent physical characteristics such as low longitudinal shrinkage and wide temperature ranges while providing an elegant appearance when used alone or on OEM equipment.
EU/China ROHS CERTIFICATE OF COMPLIANCE |
To Whom It May Concern: |
Alpha Wire Part Number: FIT-321-1/4 |
FIT-321-1/4, RoHS-Compliant Commencing With 12/1/2004 Production |
This document certifies that the Alpha part number cited above are manufactured in accordance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, better known as the RoHS Directives, with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical and electronic equipment. The reader is referred to these Directives for the specific definitions and extents of these Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with the European Union’s Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC and all subsequent revisions and China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2006. |
Substance |
Maximum Control Value |
Lead |
0.1% by weight (1000 ppm) |
Mercury |
0.1% by weight (1000 ppm) |
Cadmium |
0.01% by weight (100 ppm) |
Hexavalent Chromium |
0.1% by weight (1000 ppm ) |
Polybrominated Biphenyls (PBB) |
0.1% by weight (1000 ppm) |
Polybrominated Diphenyl Ethers (PBDE) , |
|
Including Deca-BDE |
0.1% by weight (1000 ppm) |
|
The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.
|
|
|
AMS DTL-23053/6 CL1 Colors, AMS DTL-23053/6 CL2 Clear, CA Prop 65, CSA 198, RoHS, UL 224, UL VW-1
|
|
|
|
|
|
|
ALPHA FIT heat-shrink tubing offers a reliable way to protect and seal terminations or add additional mechanical ruggedness. FIT preferred heatshrink products are made from premium compounds under the tightest manufacturing controls. This means FIT will consistently have excellent physical characteristics such as low longitudinal shrinkage and wide temperature ranges while providing an elegant appearance when used alone or on OEM equipment.
ALPHA的 FIT 热缩管为保护和密封终端或提供额外的机械强度提供一种可靠的方式。FIT热缩产品是在严格的控制下利用高质量复合材料制造而成的。这意味着,FIT 将始终保持优良的物理特性,例如较小的纵向收缩率和较宽的温度范围,并且在单独使用或结合其它设备使用时,具有优雅的外观。
|
|
|
|