1. ALPHA-Braid 編織銅帶
    ALPHA-EMI Tape 电磁干擾防護带
    ALPHA-Lacing Tape 接合带
    ALPHA-Sleeving 套管
    ALPHA-Tubing 管道
    回上一頁
  2. 產品搜尋
    分 類:
    關鍵字:  

    首頁 > > ALPHA-Tubing 管道

    ALPHA-TFT-250-3 -75 to 260 度 MIL-I-22129 Flexible PTFE Thin-Wall Tubing 鐵氟龍 具有抗燃燒、耐高温、防磨损和腐蝕管道
    看原圖
    ALPHA-TFT-250-3



    商品編號: ALPHA-TFT-250-3

    ALPHA-TFT-250-3 -75 to 260 度 MIL-I-22129 Flexible PTFE Thin-Wall Tubing 鐵氟龍 具有抗燃燒、耐高温、防磨损和腐蝕管道

     
    部件号 Material ID Wall Thickness Temperature Colors Ratings
    TFT-250-3 PTFE 0.229 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation

    Alpha套管产品尺寸齐全,具有抗燃烧、耐高温、防磨损和腐蚀,能满足您电线和电缆的布线要求。

    Offering protection from flammability, high heat, abrasion, and chemicals. Alpha tubing has the size for your wire and cable routing needs

     
     
    1) Tubing Type Non Shrinkable Tubing
    2) Tubing Material Teflon(PTFE)
    3) Nominal Inside Diameter(In) 0.234
    4) Nominal Wall Thickness(In) 0.020
    5) Color(s) NATURAL
    1) Military MIL-I-22129  
    2) Other ASTM D-3295 Type I, Class C  
    1) EU Directive 2002/95/EC(RoHS):
      All materials used in the manufacture of this part are in compliance with EU Directive 2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire's web site for compliance Date of Manufacture.
    2) REACH Regulation (EC 1907/2006):
      All materials used in the manufacture of this part do not appear on the EU REACH Substance of Very High Concern (SVHC) candiate list.
    3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the requirements of California Proposition 65.
    Physical & Mechanical Properties
    1) Temperature Range -75 to 260°C  
    2) Tensile Strength 2000psi, Min ASTM D638
    3) Elongation 200%, Min ASTM D638
    4) Specific Gravity 2.20, Max ASTM D792
    Electrical Properties
    1) Dielectric Strength 1400 V/mil, Min ASTM D149
    2) Volume Resistivity 1x10 18 ohm-cm, Min ASTM D876
    3) Dielectric Constant 2.1 IEC 250
    Chemical Properties
    1) Water Absorption 0.01%, Max ASTM D570
    2) Fungus Resistance Pass AMS-DTL-23053
    3) Halogen Free No  
    4) Lead Free No  
    Packaging
    100 FT
    Notes
    1) Put-ups may contain multiple pieces; 1000 ft & 500 ft 4 pieces Max., 100 ft. 2 pieces Max., 15 ft Min individual length.

    Alpha套管产品尺寸齐全,具有抗燃烧、耐高温、防磨损和腐蚀,能满足您电线和电缆的布线要求。

    FIT 电线管理宣传册

    符合性证明
    敬启者:
    Alpha Wire 部件号:TFT-250-3
    TFT-250-3,符合RoHS标准,以 2004/10/1 的生产为开始
    兹通过本文件证明上述 Alpha 部件号的产品系根据欧洲议会和欧洲理事会2003年1月27日第2002/95/EC号关于在电气电子设备中限制使用某些有害物质的指令(即RoHS指令)而制造。关于所述指令的具体定义和范围,请参见所述指令。对该产品的RoHS符合性不需任何豁免。
    危险物质 最大控制值
    按重量计算不得超过0.1% (1000 ppm)
    按重量计算不得超过0.1% (1000 ppm)
    按重量计算不得超过0.01% (100 ppm)
    六价镉 按重量计算不得超过0.1% (1000 ppm)
    聚溴联苯 (PBB) 按重量计算不得超过0.1% (1000 ppm)
    聚溴二苯醚 (PBDE)  
    台卡二苯醚 按重量计算不得超过0.1% (1000 ppm)
    Alpha Wire 公司已阅读本文件,并谨在此声明本文件所含信息及披露的数据在本文件发布时均准 确无误。本文件所含信息仅作为一般指南,适用于产品本身或产品组成部分的安全处理、贮存及其它操作。本文件不应被视为任何保证或质量规范。法规信息仅供参考。对于法律、法规的适用性,由产品用户根据各自的产品用途自行确定。
    Alpha Wire 公司授权代表签字:
    技术及质保部总监 Dave Watson
     
    Part # Material  ID Thickness Temperature Colors
    TFT-250-11 PTFE 0.091 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-12 PTFE 0.085 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-13 PTFE 0.072 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-14 PTFE 0.064 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-15 PTFE 0.057 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-16 PTFE 0.051 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-17 PTFE 0.045 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-18 PTFE 0.04 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-19 PTFE 0.036 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-2 PTFE 0.258 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-20 PTFE 0.032 0.016 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-22 PTFE 0.025 0.012 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-24 PTFE 0.02 0.012 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-3 PTFE 0.229 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-4 PTFE 0.204 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-5 PTFE 0.182 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-6 PTFE 0.162 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-7 PTFE 0.144 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-8 PTFE 0.129 0.02 -75 to 260 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation
    TFT-250-9 PTFE 0.114 0.02 -20 to 105 Natural ASTM D 3295 Type I, Class C, MIL-I-22129, REACH Regulation