SY-FC-M1V 1-ch 1芯光纖ST頭多模視訊光電轉換器

產品搜尋

分　類：
關鍵字：

首頁 > 宜大-電力電纜線專區 > SY-光電產品

SY-FC-M1V

商品編號: SY-FC-M1V

SY-FC-M1V 1-ch 1芯光纖ST頭多模視訊光電轉換器

Description:
SY video fiber optical converters can simultaneously transmit 1-64 channels of 8-bit digitally encoded broadcast quality video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

PRODUCT CHARACTERISTICS:
l     8-bit digitally encoded and non-compression broadcast quality video transmission
l     Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
l     Support any high-resolution video signal
l     Automatic compatible PAL, NTSC and SECAM video system
l     Power supply and other parameter state indication, which can monitor the operation condition of system
l     Support no-damage regenerative trunk of video
l     Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
l     Special ASIC design .
l     Industry-grade of operating temperature from -40℃ to 85℃ , which is applied to the different working environment
l     Hot-swap function
l     Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

★★★★商品規格描述★★★★

SY video fiber optical converters
Technical Specification
Video channels	1 channel
Video bandwidth	8 MHz
Automatic compatible video system	PAL、NTSC、SECAM
Video input / output impedance	75 Ω(unbalance)
Video signal-to-noise ratio	≥67dB
Differential gain	10%-90%APL） DG <1% ( typical value)
Differential phase	10%-90%APL）DP <0.7° ( typical value)
Video connector	BNC
Fiber-optic Specification	F/O connector: FC/ST/SC TX ：Power:-15 ~ -8dBm Sensitivity :≤-35dBm RX：Power:-15 ~ -8dBm Sensitivity :≤-35dBm Transmission Distance :20KM (single mode) Operating Wavelength: TX1310/RX1550nm（Transmitter）；TX1550/RX1310nm（Receiver）
Specification of custom-made options
Data		Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400Kbps BER: ≤10^-9
Audio		Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted)
Telephone		Connector: RJ11 Bandwidth :8KHZ Features：Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO
Ethernet		Connector: RJ45 Support mode : Half duplex or Full duplex Standards：IEEE802.3 Data rate : 10M / 100Mbps Bandwidth: 25M

Dimensions: 11.1(L)×10.7(W)×2.8(H) cm
Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
Operating Temperature: -40℃ to +85℃
Storing Temperature : -55℃ to +85℃
Humidity: 0 to 95% non-condensing
MTBF : ≥ 10⁵ hours
Warranty : 3 years
Application :
Intelligent Transportation System
Connection of Sub-network for Surveillance Center
Public Security Surveillance
High Way & Toll Station Surveillance
Industrial Closed Circuit Television Surveillance