IEC Separable Connectors 42 kV, 1250A Front T-Body / Coupling (Rear) T-Body Connector

IEC 42 kV 1250 A 高壓電纜前後插處理頭

YEIDA 42 kV 1250 A IEC T 型接頭符合IEC 60502-4 設計規範，產品可安
裝於變壓器，開關箱等各種設備中，符合42 kV 電壓等級要求。屋內或戶外皆可
使用。介面設計為”C” 1250 A 介面。適用於各式電纜，產品前插型及後插型
兩種選擇，請見下方訂購說明。

前插型接頭
42-FDT1250 X Y Z

後插型接頭
42-RDT1250 X Y Z

X : 請填入電纜絕緣層尺寸代碼
歐式接頭產品線 - 42 kV 電壓等級類別
線徑代碼選項mm 公厘
D 19.10-25.00
E 23.60-26.40
F 24.90-28.30
G 26.40-29.90
H 27.80-31.50
J 29.50-33.20
K 31.00-34.90
L 32.60-35.40
M 34.40-38.60
N 37.70-40.50
P 38.90-41.70
Q 40.00-42.80
R 42.30-45.30
S 44.60-47.60
T 46.90-49.90
U 49.20-52.20
V 51.40-54.50

Y: 填入導體尺寸代碼
導體尺寸代碼mm²
025 25
035 35
050 50
070 70
095 95
120 120
150 150
185 185
240 240
300 300
400 400
500 500
630 630
800 800

Application

Chard Front T-Body / Coupling (Rear) T-Body connectors are fully screened and fully submersible when mated with proper bushings or plugs. The products are used to terminate polymeric cable to dead front apparatus such as transformers, switchgear, and other equipment. They can be used for 36kV and 42 kV applications. The Chardon T-body connectors are suitable for indoor or outdoor applications, and are able to be used for all polymeric cable types ( XLPE, ETP, etc.) with copper or aluminum conductors. The design is especially suited for the harsh off-shore or wind farm environment, where long runs and large cable sizes are needed.

Key Features

˙Provides a fully shielded and submersible connection when mated with the proper bushing or plug.

˙Type “C” 1250A interface.

˙Mounting can be vertical, horizontal, or any angle in between.

˙No minimum phase clearance requirements.

˙100% electrical tested in production.

Product Ratings

Maximum Voltage Class (U ): 42 kV m

AC 5 Minute Withstand: 117 kV

DC 15 Minute Voltage Withstand: 125 kV

Minimum Corona Voltage Level: 45 kV < 10 pC

BIL and Full Wave Crest (Impulse): 200 kV

Thermal Short Circuit (Conductor, 3 sec.) 45 kA

Dynamic Short Circuit 100 kA

Continuous Current 1250 A

KEYWORD: YEIDA, 宜大電線, 台灣電力公司, 3M, Tyco, 太平洋電線, 士林電機, 中興電工,東元馬達, 高壓電線, 高壓電纜處理頭,
YEIDA, 42-FDT1250 X Y Z, 42-RDT1250 X Y Z, IEC60502-4, 42 kV, 1250 A, 高壓電纜前後插處理頭