商品編號: TIMES-LMR-LW195
TIMES-LMR-LW195 lightweight low loss coaxial cable 50歐姆低損耗質輕低成本同軸電纜 接頭 工具及跳線組裝
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,
WiMax, SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• Drop-in replacement for RG-58 and RG-142
|
|
|
|
|
LMR® lite-195
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,
WiMax, SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• Drop-in replacement for RG-58 and RG-142
• LMR-LW195 is a lightweight low loss coaxial cable
that employs an aluminum braid shield instead of the
traditional tinned copper shield. LMR-LW195 has been
designed and engineered with a combination of electrical,
physical and mechanical properties that reduce weight
and cost.
• Flexibility and bendability that are hallmarks of
LMR-195 are also the same for LMR-LW195. The
flexible outer conductor enables the tightest bend radius
available for any cable of similar size and performance.
•Low Loss is another hallmark feature of LMR-LW195.
Size for size LMR® has the lowest loss of any flexible
cable and comparable loss to semi rigid hard-line cables.
• RF Shielding is 50 dB greater than typical single
shielded coax (40 dB). The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180
dB between two adjacent cables).
• Weatherability: LMR-LW195 cables designed for
outdoor exposure incorporate the best materials for UV
resistance and have life expectancy in excess of 20 years.
• Connectors: LMR-LW195 uses the same connectors,
tools and installation accessories as standard LMR®. A
wide variety of connectors are available for LMR-LW195
including all common interface types, reverse polarity, and
a choice of solder or non-solder center pins. Most LMR
• Cable Assemblies: All LMR-LW195 cable types are
available as pre-terminated cable assemblies.
|
Construction
Center Conductor: Solid Bare Copper for
LMR-LW195 through LMR-LW240
Copper-Clad Aluminum for LMR-LW400
and LMR-LW600
Dielectric: Closed Cell Low Density Foam PE
Inner Shield: Aluminum/Polyester/Aluminum
Outer Shield: Aluminum Braid
Jacket: Black UV & Sunlight Resistant
Polyethylene
Benefits
— Low Loss
— -40°C to +85°C Operating Range
— Lightweight for Low Shipping Cost and
Ease of Handling
— Excellent Environmental Stability
— Uses same Connectors and Accessories as
Standard LMR® Cable
|
|
|
|