商品編號: TIMES-LMR-LW400
TIMES-LMR-LW400 lightweight low loss coaxial cable 50歐姆低損耗質輕低成本同軸電纜 接頭 工具及跳線組裝
• Drop-in replacement for RG-8/9913 Air-Dielectric type Cable
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,
WiMax, SCADA, Mobile Antennas) requiring an
easily routed, low loss RF cable
|
|
|
|
|
LMR lite®-400
Flexible Low Loss Communications Coax
Ideal for…
• Drop-in replacement for RG-8/9913 Air-Dielectric type Cable
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,
WiMax, SCADA, Mobile Antennas) requiring an
easily routed, low loss RF cable
• LMR-LW400 is a lightweight low loss coaxial cable
that employs an aluminum braid shield instead of the
traditional tinned copper shield. LMR-LW400 has
been designed and engineered with a combination of
electrical, physical and mechanical properties that
reduce weight and cost.
• Flexibility and bendability that are hallmarks of
LMR-400 are also the same for LMR-LW400. The
flexible outer conductor enables the tightest bend radius
available for any cable of similar size and performance.
•Low Loss is another hallmark feature of LMRLW400.
Size for size LMR® has the lowest loss of any
flexible cable and comparable loss to semi rigid hardline
cables.
• RF Shielding is 50 dB greater than typical single
shielded coax (40 dB). The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180
dB between two adjacent cables).
• Weatherability: LMR-LW400 cables designed for
outdoor exposure incorporate the best materials for
UV resistance and have life expectancy in excess of
20 years.
• Connectors: LMR-LW400 uses the same connectors,
tools and installation accessories as standard
LMR®. A wide variety of connectors are available
for LMR-LW400 including all common interface
types, reverse polarity, and a choice of solder
or non-solder center pins. Most LMR connectors
employ crimp outer attachment using standard hex
crimp sizes.
• Cable Assemblies: All LMR-LW400 cable types are
available as pre-terminated cable assemblies.
|
|
|
|