1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    AMAX-1220 Open Frame Type 2-axis AMONet Motion Slave Modules 開放式框架型2軸AMONET運動從模塊
    看原圖
    		Advant-AMAX-1220

    商品編號: Advant-AMAX-1220

    AMAX-1220 Open Frame Type 2-axis AMONet Motion Slave Modules 開放式框架型2軸AMONET運動從模塊

    Distributed Motion Control Solution

    AMAX-1220

    Open Frame Type 2-axis AMONet Motion Slave Modules

    開放式框架型2軸AMONET運動模塊

    產品特色
    • End limit logic is switchable (high or low active)
    • BoardID is switchable
    • Easily visible LED indicators on board to do diagnosis.
    • Direct wire to servo drive to save terminal board space while installation.
    • Max. 6.5 MHz, 4-axis pulse output
    • 28 bits counter for incremental encoder
    • Horizontal installation for for servo or stepping motor driver
    • Suitable for DIN-rail mounting

     

    AMAX-1220-AE
     
     
    General Power Consumption 2 W @ 24 V typical
    Power Input 24 VDC within 200 mV ripple
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
    Bus AMONet RS-485
    Certifications CE, FCC class A
    Dimensions 141 x 108 x 60 mm (5.6" x 4.3" x 2.4")
    Connector RJ-45 x 2 are for communication port DB-26 connector by transfer cable to servo drives. Other are screw terminal type connectors
    Advanced Function BoardID Switch V
    Encoder Channels 2
    Limit Switch Input 4
    Home Input Channels 2
    Emergency Stop Input Channels 1
    Slow Down Limit Switches 4
    Servo On Output Channels 2
    Simultaneously Start/
    Stop among Modules    		 V
    Axis Number of Axis 2
    Linear Interpolation V
    2-axis Circle Interpolation V

     

    產品料號 說明
       
    AMAX-1220-AE CIRCUIT MODULE, Open Frame 2-Axis Motion Module

     

    AMAX-1220 and AMAX-1240 have compact open frame designs for horizontal placement and an interface connector mounted on the board. With a transfer cable to servo drive, both models can conveniently connect to Mitsubishi J3, Yaskwa Sigma V and Panasonic A4/A5.
    The AMAX-1220 is an economic 2-axis AMONet slave module which supports motion functionality in point-to-point (PTP), linear & circular interpolation, simultaneously start/stop among multiple slave modules, and brake signal to servo for emergence consideration. The AMAX-1240 is an advanced 4-axis AMONet slave module which not only supports AMAX-1220 motion functionality, but also supports advanced features in position compare and triggering function. Both linear interval and table setups are supported.

    AMAX-1220和AMAX-1240具有水平放置和安裝在板上的接口連接器緊湊的開放式架構設計。隨著傳輸線連接到伺服驅動，這兩種模式可以方便地連接到三菱J3，Yaskwa西格瑪V和松下A4/ A5。
     AMAX的-1220是一種經濟的2軸AMONET從動支持運動功能在點對點（PTP），線性和圓弧插補模塊，同時啟動/停止在多個從模塊，和制動信號為伺服對出苗的考慮。 AMAX的-1240是一種先進的4軸AMONET從模塊它不僅支持AMAX-1220的運動功能，而且還支持先進的功能，在位置比較和觸發功能。線性間隔和表設置的支持。