AMAX-2754SY

32-ch Isolated Digital Output AMONet Module

32路隔離數位輸出模塊AMONET

• Max. 20 Mbps transfer rate
• Onboard terminal for direct wiring
• Easy installation with RJ45 phone jack and LED diagnostic
• LED indicator for each IO channel (switch by SW4)
• Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch Digital I/O)
• 2,500 VRMS Isolation voltage
• Suitable for DIN-rail mounting

The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2,048 I/O channels in 1.04 ms.

該AMAX-2750SY系列由數字從模塊AMONET RS-485，擴展了數字I / O能力。所有的數字I/ O從屬擴展模塊用一個簡單的5類電纜串行連接。這減少了佈線驅動器和控制器之間，並且非常適合於高度集成的機器自動化應用。高速，可擴展性和成本效益，確保了設備製造商的固溶體。有3種主要類型的數字I / O從站模塊，32路數字輸入，32路數字輸出，16/16路數字量輸入/輸出。有了這些從站模塊，您可以直接與最低的麻煩連接器/傳感器。您可以訪問我附近或距離酒店100米/ O點使用簡單和低成本的佈線，以及AMONET RS-485的高速使得它可以掃描2048 I / O通道在1.04毫秒。